Load data for 10.3 x 60 R Swiss + .413 | 200gr | Reichenberg HDB Sp. Jagd

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.413 \| 200gr \| Reichenberg HDB Sp. Jagd
Bullet Weight:	200gr \| 13.0g
Bullet Diameter:	0.413" \| 10.49mm
Bullet Length:	0.803" \| 20.4mm
Caliber:	10.3 x 60 R Swiss load data
Case Length (l3):	2.392" \| 60.8mm
Cartridge Length (C.O.L.):	3.059" \| 77.7mm
Seated Depth:	0.136" \| 3.4mm
Shank Seated Depth:	0.017" \| 0.4mm
Case Capacity:	91.0 Grains of Water \| 5.91 cm³
Primer Size:	Large Rifle Magnum (LRM)
Max. allowed Pressure:	39160 psi \| 2700 bar
LID:	LID_B10200_C1295
Last updated:	2025-02-02
Recommended Twist Rate:	1:33 - 1:28

Load data for 44 loads in caliber 10.3 x 60 R Swiss with .413 | 200gr | Reichenberg HDB Sp. Jagd bullet and 22 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	84%	35070	90%	**79	94%
Accurate 2015	<<locked>>	89%	34940	89%	**53	96%
Accurate 2495	<<locked>>	96%	34969	89%	**54	96%
Alliant AR-Comp	<<locked>>	93%	35085	90%	**38	98%
Alliant Reloder-10x	<<locked>>	86%	35172	90%	**79	97%
[Hodgdon H322]*	<<locked>>	89%	35070	90%	**79	94%
[Hodgdon H335]*	<<locked>>	84%	34882	89%	**69	92%
Hodgdon TrailBoss	<<locked>>	96%	29834	76%	**37	100%
[IMR 3031]*	<<locked>>	97%	34229	87%	**18	94%
IMR 4198	<<locked>>	84%	34998	89%	**23	98%
[Norma 202]*	<<locked>>	94%	34998	89%	**82	92%
ReloadSwiss RS 14	<<locked>>	97%	29965	77%	**90	100%
[Rottweil R 901]*	<<locked>>	90%	35085	90%	**43	92%
[SNPE Vectan SP 10]*	<<locked>>	83%	34766	89%	**59	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	91%	34954	89%	**84	92%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	33794	86%	**67	93%
[Somchem S335]*	<<locked>>	92%	35085	90%	**13	94%
Vihtavuori N130	<<locked>>	88%	35201	90%	**13	97%
Vihtavuori N133	<<locked>>	94%	35143	90%	**23	96%
[Vihtavuori N135]*	<<locked>>	97%	28123	72%	**95	92%
[Vihtavuori N140]*	<<locked>>	96%	34998	89%	**49	93%
[Vihtavuori N540]*	<<locked>>	96%	34867	89%	**69	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	32039	82%	**90	92%
[Accurate 2015]*	<<locked>>	81%	27035	69%	**39	93%
[Accurate 2495]*	<<locked>>	85%	23569	60%	**16	90%
[Alliant AR-Comp]*	<<locked>>	81%	24149	62%	**90	93%
Alliant Reloder-10x	<<locked>>	81%	30168	77%	**48	95%
[Hodgdon H322]*	<<locked>>	83%	28703	73%	**89	90%
[Hodgdon H335]*	<<locked>>	81%	31386	80%	**71	90%
Hodgdon TrailBoss	<<locked>>	81%	23641	60%	**90	100%
[IMR 3031]*	<<locked>>	90%	27485	70%	**08	90%
IMR 4198	<<locked>>	81%	32416	83%	**54	97%
[Norma 202]*	<<locked>>	90%	30487	78%	**61	90%
ReloadSwiss RS 14	<<locked>>	81%	23496	60%	**29	100%
[Rottweil R 901]*	<<locked>>	86%	30980	79%	**35	90%
[SNPE Vectan SP 10]*	<<locked>>	81%	32300	82%	**00	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	30763	79%	**72	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	91%	28427	73%	**13	90%
[Somchem S335]*	<<locked>>	85%	28152	72%	**23	90%
[Vihtavuori N130]*	<<locked>>	81%	28645	73%	**43	94%
[Vihtavuori N133]*	<<locked>>	82%	24555	63%	**05	90%
[Vihtavuori N135]*	<<locked>>	94%	25817	66%	**16	90%
[Vihtavuori N140]*	<<locked>>	91%	30240	77%	**25	90%
[Vihtavuori N540]*	<<locked>>	93%	31546	81%	**77	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.