Load data for .510 DTC + .510 | 750gr | Barnes Banded Solid BT Bore Rider

.510 DTC cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:750 gr
Bullet Diameter:0.51"
Bullet Length:<<locked>>
Case Length (l3):3.785"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:300 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:29"
Max. allowed Pressure:52,214 psi
Recommended Twist Rate:1:15.0

Load data in caliber .510 DTC with .510 | 750gr | Barnes Banded Solid BT Bore Rider bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2218, Alliant Reloder-33 and Alliant Reloder-50.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 29"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>98%44,425 psi85%2451 fps98.6%
ADI AR 2217<<locked>>88%45,629 psi87%2434 fps100%
ADI AR 2218<<locked>>92%45,005 psi86%2546 fps99.3%
ADI AR 2225<<locked>>90%44,918 psi86%2464 fps100%
Alliant Reloder-25<<locked>>84%46,195 psi88%2431 fps100%
Alliant Reloder-33<<locked>>90%46,470 psi89%2530 fps99.3%
Alliant Reloder-50<<locked>>94%46,238 psi89%2530 fps99%
Baschieri & Pellagri 109<<locked>>82%47,166 psi90%2418 fps99.3%
Bofors RP15<<locked>>82%47,123 psi90%2438 fps100%
Bofors RP30<<locked>>86%46,050 psi88%2454 fps100%
Hodgdon H1000<<locked>>86%46,659 psi89%2448 fps100%
Hodgdon Retumbo<<locked>>84%45,382 psi87%2507 fps100%
Hodgdon TrailBossᴾ<<locked>>100%38,043 psi73%1552 fps100%
IMR 7977 Enduron<<locked>>84%45,165 psi87%2329 fps96.3%
IMR 8133 Enduron<<locked>>92%44,483 psi85%2454 fps100%
Lovex S071<<locked>>84%46,412 psi89%2339 fps100%
Norma 217<<locked>>92%45,440 psi87%2470 fps100%
Ramshot Magnum<<locked>>82%44,396 psi85%2388 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%39,102 psi75%1591 fps100%
ReloadSwiss RS 76<<locked>>84%44,817 psi86%2493 fps100%
ReloadSwiss RS 80<<locked>>86%44,295 psi85%2474 fps99.9%
SNPE Vectan SP 13<<locked>>98%46,644 psi89%2464 fps98.6%
Vihtavuori 20N29ᴾ<<locked>>100%43,294 psi83%2438 fps96.6%
Vihtavuori N170<<locked>>86%46,760 psi90%2411 fps98.1%
Vihtavuori N565<<locked>>82%44,643 psi86%2415 fps100%
Vihtavuori N568<<locked>>86%45,411 psi87%2477 fps99.8%
Vihtavuori N570<<locked>>88%46,427 psi89%2536 fps99.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 29"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>90%33,663 psi64%2241 fps95.4%
ADI AR 2217<<locked>>80%34,882 psi67%2241 fps99.4%
ADI AR 2218198.1 gr82%31,749 psi61%2251 fps95%
ADI AR 2225<<locked>>80%32,140 psi62%2228 fps100%
Alliant Reloder-25<<locked>>80%40,364 psi77%2339 fps100%
Alliant Reloder-33196.8 gr80%32,329 psi62%2251 fps95.7%
Alliant Reloder-50206 gr84%32,242 psi62%2251 fps95%
Baschieri & Pellagri 109<<locked>>80%44,222 psi85%2369 fps98.9%
Bofors RP15<<locked>>80%44,150 psi85%2388 fps100%
Bofors RP30<<locked>>80%37,666 psi72%2306 fps99.8%
Hodgdon H1000<<locked>>80%37,869 psi73%2300 fps99.9%
Hodgdon Retumbo<<locked>>80%39,450 psi76%2408 fps100%
Hodgdon TrailBoss<<locked>>80%28,601 psi55%1385 fps100%
IMR 7977 Enduron<<locked>>82%42,467 psi81%2280 fps95.5%
IMR 8133 Enduron<<locked>>80%29,776 psi57%2162 fps98.1%
Lovex S071<<locked>>80%40,959 psi78%2257 fps100%
Norma 217<<locked>>80%30,124 psi58%2185 fps99.6%
Ramshot Magnum<<locked>>80%41,278 psi79%2339 fps100%
ReloadSwiss RS 14<<locked>>80%29,443 psi56%1417 fps100%
ReloadSwiss RS 76<<locked>>80%38,624 psi74%2388 fps100%
ReloadSwiss RS 80<<locked>>80%35,505 psi68%2310 fps98.7%
SNPE Vectan SP 13<<locked>>90%35,708 psi68%2264 fps95.8%
Vihtavuori 20N29<<locked>>98%40,364 psi77%2382 fps95.7%
Vihtavuori N170<<locked>>80%38,392 psi74%2260 fps96%
Vihtavuori N565<<locked>>80%41,814 psi80%2365 fps99.8%
Vihtavuori N568<<locked>>80%36,782 psi70%2320 fps98.5%
Vihtavuori N570<<locked>>80%34,954 psi67%2313 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .510 DTC loaded with the .510 | 750gr | Barnes Banded Solid BT Bore Rider. ADI AR 2218 delivers the highest muzzle velocity at 2,546 fps; across all powders the maximum-charge window runs from 1,552 fps to 2,546 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (360 MPa), the top charges use 73–90 %, leaving at least 10 % headroom. The 750.0 gr projectile in 0.51" calls for a 1:15.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, Vihtavuori 20N29 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2218, Alliant Reloder-33, Alliant Reloder-50 rank at the top here: for .510 DTC with the .510 | 750gr | Barnes Banded Solid BT Bore Rider they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data