Load data for .510 DTC + .510 | 725gr | Lehigh Defense Controlled Fracturing

.510 DTC cartridge drawing
Lehigh Defense logo

Load Specifications

Bullet Manufacturer:Lehigh Defense
Bullet Weight:725 gr
Bullet Diameter:0.51"
Bullet Length:<<locked>>
Case Length (l3):3.785"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:300 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:29"
Max. allowed Pressure:52,214 psi
Recommended Twist Rate:1:17.0

Load data in caliber .510 DTC with .510 | 725gr | Lehigh Defense Controlled Fracturing bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2218, Alliant Reloder-33 and Alliant Reloder-50.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 29"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>98%44,193 psi85%2503 fps98.5%
ADI AR 2217<<locked>>88%45,397 psi87%2487 fps100%
ADI AR 2218<<locked>>92%44,773 psi86%2598 fps99.2%
ADI AR 2225<<locked>>90%44,686 psi86%2516 fps100%
Alliant Reloder-25<<locked>>84%45,861 psi88%2480 fps100%
Alliant Reloder-33<<locked>>90%46,224 psi89%2579 fps99.2%
Alliant Reloder-50<<locked>>94%45,745 psi88%2575 fps98.8%
Baschieri & Pellagri 109<<locked>>82%47,007 psi90%2474 fps99.2%
Bofors RP15<<locked>>82%46,702 psi89%2487 fps100%
Bofors RP30<<locked>>86%45,585 psi87%2503 fps100%
Hodgdon H1000<<locked>>86%46,398 psi89%2500 fps100%
Hodgdon Retumbo<<locked>>84%45,078 psi86%2562 fps100%
Hodgdon TrailBossᴾ<<locked>>100%37,985 psi73%1598 fps100%
IMR 7977 Enduron<<locked>>84%44,918 psi86%2379 fps96.1%
IMR 8133 Enduron<<locked>>94%47,166 psi90%2552 fps100%
Lovex S071<<locked>>84%45,730 psi88%2388 fps100%
Norma 217<<locked>>92%45,034 psi86%2520 fps100%
Ramshot Magnum<<locked>>82%43,976 psi84%2438 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%38,986 psi75%1634 fps100%
ReloadSwiss RS 76<<locked>>84%44,585 psi85%2543 fps100%
ReloadSwiss RS 80<<locked>>86%43,830 psi84%2520 fps99.8%
SNPE Vectan SP 13<<locked>>98%46,340 psi89%2513 fps98.5%
Vihtavuori 20N29ᴾ<<locked>>100%42,960 psi82%2484 fps96.3%
Vihtavuori N170<<locked>>86%46,369 psi89%2461 fps98%
Vihtavuori N565<<locked>>84%47,239 psi90%2513 fps100%
Vihtavuori N568<<locked>>86%45,005 psi86%2526 fps99.7%
Vihtavuori N570<<locked>>88%46,108 psi88%2589 fps99%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 29"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>90%33,156 psi64%2280 fps95%
ADI AR 2217<<locked>>80%34,403 psi66%2283 fps99.2%
ADI AR 2218212.4 gr84%33,562 psi64%2349 fps95.7%
ADI AR 2225<<locked>>80%31,589 psi61%2264 fps100%
Alliant Reloder-25<<locked>>80%39,943 psi77%2385 fps100%
Alliant Reloder-33206 gr80%31,778 psi61%2283 fps95.1%
Alliant Reloder-50220.8 gr86%33,968 psi65%2339 fps95.5%
Baschieri & Pellagri 109<<locked>>80%44,034 psi84%2421 fps98.8%
Bofors RP15<<locked>>80%43,714 psi84%2441 fps100%
Bofors RP30<<locked>>80%37,130 psi71%2349 fps99.6%
Hodgdon H1000<<locked>>80%37,507 psi72%2346 fps99.9%
Hodgdon Retumbo<<locked>>80%39,044 psi75%2454 fps100%
Hodgdon TrailBoss<<locked>>80%28,529 psi55%1424 fps100%
IMR 7977 Enduron<<locked>>82%42,105 psi81%2329 fps95.3%
IMR 8133 Enduron<<locked>>80%29,138 psi56%2195 fps97.7%
Lovex S071<<locked>>80%40,176 psi77%2300 fps100%
Norma 217<<locked>>80%29,443 psi56%2218 fps99.4%
Ramshot Magnum<<locked>>80%40,814 psi78%2385 fps100%
ReloadSwiss RS 14<<locked>>80%29,312 psi56%1460 fps100%
ReloadSwiss RS 76<<locked>>80%38,189 psi73%2434 fps100%
ReloadSwiss RS 80<<locked>>80%34,954 psi67%2346 fps98.4%
SNPE Vectan SP 13<<locked>>90%35,215 psi67%2303 fps95.5%
Vihtavuori 20N29<<locked>>98%39,958 psi77%2425 fps95.4%
Vihtavuori N170<<locked>>80%37,869 psi73%2303 fps95.7%
Vihtavuori N565<<locked>>80%41,249 psi79%2411 fps99.7%
Vihtavuori N568<<locked>>80%36,289 psi70%2359 fps98.3%
Vihtavuori N570<<locked>>80%34,490 psi66%2352 fps95.9%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .510 DTC loaded with the .510 | 725gr | Lehigh Defense Controlled Fracturing. ADI AR 2218 delivers the highest muzzle velocity at 2,598 fps; across all powders the maximum-charge window runs from 1,598 fps to 2,598 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (360 MPa), the top charges use 73–90 %, leaving at least 10 % headroom. The 725.0 gr projectile in 0.51" calls for a 1:17.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, Vihtavuori 20N29 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2218, Alliant Reloder-33, Alliant Reloder-50 rank at the top here: for .510 DTC with the .510 | 725gr | Lehigh Defense Controlled Fracturing they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data