Load data for .510 DTC + .510 | 720gr | Lehigh Defense Match Solid

.510 DTC cartridge drawing
Lehigh Defense logo

Load Specifications

Bullet Manufacturer:Lehigh Defense
Bullet Weight:720 gr
Bullet Diameter:0.51"
Bullet Length:<<locked>>
Case Length (l3):3.785"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:300 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:29"
Max. allowed Pressure:52,214 psi
Recommended Twist Rate:1:16.0

Load data in caliber .510 DTC with .510 | 720gr | Lehigh Defense Match Solid bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2218, Vihtavuori N570 and Alliant Reloder-50.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 29"

PowderChargeFRMaxP%V(0)z
Accurate 8700ᴾ<<locked>>100%46,557 psi89%2546 fps98.8%
ADI AR 2217<<locked>>88%44,643 psi86%2484 fps100%
ADI AR 2218<<locked>>92%43,947 psi84%2589 fps99%
ADI AR 2225<<locked>>92%46,949 psi90%2559 fps100%
Alliant Reloder-25<<locked>>84%45,034 psi86%2477 fps100%
Alliant Reloder-33<<locked>>90%45,252 psi87%2569 fps99%
Alliant Reloder-50<<locked>>94%44,730 psi86%2566 fps98.6%
Baschieri & Pellagri 109<<locked>>82%46,383 psi89%2467 fps99.1%
Bofors RP15<<locked>>82%45,977 psi88%2484 fps100%
Bofors RP30<<locked>>86%44,788 psi86%2497 fps100%
Hodgdon H1000<<locked>>86%45,600 psi87%2497 fps100%
Hodgdon Retumbo<<locked>>84%44,193 psi85%2556 fps100%
Hodgdon TrailBossᴾ<<locked>>100%37,913 psi73%1598 fps100%
IMR 7977 Enduron<<locked>>84%44,295 psi85%2375 fps95.8%
IMR 8133 Enduron<<locked>>94%46,253 psi89%2546 fps100%
Lovex S071<<locked>>84%45,020 psi86%2385 fps100%
Norma 217<<locked>>94%47,166 psi90%2562 fps100%
Ramshot Magnum<<locked>>84%46,485 psi89%2484 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%38,972 psi75%1637 fps100%
ReloadSwiss RS 76<<locked>>86%47,108 psi90%2589 fps100%
ReloadSwiss RS 80<<locked>>88%46,296 psi89%2569 fps99.9%
SNPE Vectan SP 13<<locked>>98%45,455 psi87%2503 fps98.2%
Vihtavuori N165<<locked>>82%46,876 psi90%2425 fps100%
Vihtavuori N170<<locked>>86%45,658 psi87%2457 fps97.7%
Vihtavuori N565<<locked>>84%46,470 psi89%2507 fps100%
Vihtavuori N568<<locked>>86%44,179 psi85%2520 fps99.6%
Vihtavuori N570<<locked>>88%45,194 psi87%2579 fps98.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 29"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>92%34,911 psi67%2326 fps95.6%
ADI AR 2217<<locked>>80%33,808 psi65%2277 fps99%
ADI AR 2218210.4 gr84%32,967 psi63%2339 fps95.2%
ADI AR 2225<<locked>>80%31,024 psi59%2257 fps99.9%
Alliant Reloder-25<<locked>>80%39,218 psi75%2382 fps100%
Alliant Reloder-33<<locked>>82%33,533 psi64%2333 fps95.8%
Alliant Reloder-50218.7 gr86%33,185 psi64%2329 fps95%
Baschieri & Pellagri 109<<locked>>80%43,410 psi83%2418 fps98.6%
Bofors RP15<<locked>>80%43,018 psi82%2434 fps100%
Bofors RP30<<locked>>80%36,463 psi70%2343 fps99.5%
Hodgdon H1000<<locked>>80%36,825 psi71%2339 fps99.8%
Hodgdon Retumbo<<locked>>80%38,319 psi73%2448 fps100%
Hodgdon TrailBoss<<locked>>80%28,500 psi55%1424 fps100%
IMR 7977 Enduron<<locked>>82%41,553 psi80%2326 fps95%
IMR 8133 Enduron<<locked>>80%28,558 psi55%2185 fps97.3%
Lovex S071<<locked>>80%39,552 psi76%2297 fps100%
Norma 217<<locked>>80%28,790 psi55%2208 fps99.2%
Ramshot Magnum<<locked>>80%40,059 psi77%2379 fps100%
ReloadSwiss RS 14<<locked>>80%29,283 psi56%1460 fps100%
ReloadSwiss RS 76<<locked>>80%37,434 psi72%2428 fps100%
ReloadSwiss RS 80<<locked>>80%34,185 psi65%2339 fps98.1%
SNPE Vectan SP 13<<locked>>90%34,505 psi66%2293 fps95%
Vihtavuori N165<<locked>>80%43,903 psi84%2379 fps100%
Vihtavuori N170<<locked>>80%37,260 psi71%2297 fps95.3%
Vihtavuori N565<<locked>>80%40,509 psi78%2402 fps99.6%
Vihtavuori N568<<locked>>80%35,578 psi68%2352 fps98%
Vihtavuori N570196.3 gr80%33,779 psi65%2343 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .510 DTC loaded with the .510 | 720gr | Lehigh Defense Match Solid. ADI AR 2218 delivers the highest muzzle velocity at 2,589 fps; across all powders the maximum-charge window runs from 1,598 fps to 2,589 fps. Accurate 8700 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (360 MPa), the top charges use 73–90 %, leaving at least 10 % headroom. The 720.0 gr projectile in 0.51" calls for a 1:16.0 twist; slower twists will usually not stabilise this weight. Accurate 8700, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2218, Vihtavuori N570, Alliant Reloder-50 rank at the top here: for .510 DTC with the .510 | 720gr | Lehigh Defense Match Solid they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data