Load data for .510 DTC + .510 | 700gr | General Dynamics FMJ

.510 DTC cartridge drawing
GM Geschoss-Manufaktur logo

Load Specifications

Bullet Manufacturer:GM Geschoss-Manufaktur
Bullet Weight:700 gr
Bullet Diameter:0.51"
Bullet Length:<<locked>>
Case Length (l3):3.785"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:300 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:29"
Max. allowed Pressure:52,214 psi
Recommended Twist Rate:1:16.0

Load data in caliber .510 DTC with .510 | 700gr | General Dynamics FMJ bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2218, Alliant Reloder-50 and Alliant Reloder-33.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 29"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>98%44,846 psi86%2556 fps98.3%
ADI AR 2217<<locked>>88%45,890 psi88%2539 fps100%
ADI AR 2218<<locked>>92%45,310 psi87%2651 fps99.1%
ADI AR 2225<<locked>>90%45,295 psi87%2572 fps100%
Alliant Reloder-25<<locked>>84%46,398 psi89%2536 fps100%
Alliant Reloder-33<<locked>>90%46,934 psi90%2638 fps99.2%
Alliant Reloder-50<<locked>>94%46,717 psi89%2635 fps98.8%
Bofors RP30<<locked>>86%46,253 psi89%2559 fps100%
Hodgdon H1000<<locked>>86%46,920 psi90%2552 fps100%
Hodgdon Retumbo<<locked>>84%45,556 psi87%2615 fps100%
Hodgdon TrailBossᴾ<<locked>>100%38,058 psi73%1631 fps100%
IMR 7977 Enduron<<locked>>84%45,353 psi87%2428 fps95.9%
IMR 8133 Enduron<<locked>>92%44,831 psi86%2559 fps100%
Lovex S071<<locked>>84%46,543 psi89%2444 fps100%
Norma 217<<locked>>92%45,730 psi88%2579 fps100%
Ramshot Magnum<<locked>>82%44,643 psi86%2490 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%39,131 psi75%1670 fps100%
ReloadSwiss RS 76<<locked>>84%45,150 psi86%2598 fps100%
ReloadSwiss RS 80<<locked>>86%44,643 psi86%2575 fps99.8%
SNPE Vectan SP 13<<locked>>98%47,050 psi90%2566 fps98.4%
Vihtavuori 20N29ᴾ<<locked>>100%43,685 psi84%2536 fps96.2%
Vihtavuori N170<<locked>>86%47,007 psi90%2513 fps97.8%
Vihtavuori N565<<locked>>82%44,918 psi86%2516 fps99.9%
Vihtavuori N568<<locked>>86%45,687 psi88%2582 fps99.7%
Vihtavuori N570<<locked>>88%46,746 psi90%2641 fps98.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 29"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>92%36,303 psi70%2388 fps95.9%
ADI AR 2217<<locked>>80%35,027 psi67%2333 fps99.1%
ADI AR 2218215.6 gr84%34,229 psi66%2402 fps95.6%
ADI AR 2225<<locked>>80%32,300 psi62%2320 fps100%
Alliant Reloder-25<<locked>>80%40,509 psi78%2441 fps100%
Alliant Reloder-33209.1 gr80%32,547 psi62%2339 fps95.1%
Alliant Reloder-50224.1 gr86%34,969 psi67%2398 fps95.6%
Bofors RP30<<locked>>80%37,869 psi73%2405 fps99.6%
Hodgdon H1000<<locked>>80%38,101 psi73%2398 fps99.8%
Hodgdon Retumbo<<locked>>80%39,653 psi76%2510 fps100%
Hodgdon TrailBoss<<locked>>80%28,645 psi55%1457 fps100%
IMR 7977 Enduron<<locked>>82%42,554 psi82%2379 fps95.1%
IMR 8133 Enduron<<locked>>80%29,936 psi57%2251 fps97.7%
Lovex S071<<locked>>80%41,089 psi79%2356 fps100%
Norma 217<<locked>>80%30,255 psi58%2274 fps99.4%
Ramshot Magnum<<locked>>80%41,539 psi80%2441 fps100%
ReloadSwiss RS 14<<locked>>80%29,428 psi56%1493 fps100%
ReloadSwiss RS 76<<locked>>80%38,870 psi74%2490 fps100%
ReloadSwiss RS 80<<locked>>80%35,752 psi68%2402 fps98.4%
SNPE Vectan SP 13<<locked>>90%35,984 psi69%2356 fps95.4%
Vihtavuori 20N29<<locked>>98%40,770 psi78%2480 fps95.3%
Vihtavuori N170<<locked>>80%38,609 psi74%2356 fps95.6%
Vihtavuori N565<<locked>>80%41,974 psi80%2464 fps99.7%
Vihtavuori N568<<locked>>80%37,014 psi71%2415 fps98.2%
Vihtavuori N570<<locked>>80%35,201 psi67%2408 fps95.8%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 31 powders for .510 DTC loaded with the .510 | 700gr | General Dynamics FMJ. ADI AR 2218 delivers the highest muzzle velocity at 2,651 fps; across all powders the maximum-charge window runs from 1,631 fps to 2,651 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 31 of the 31 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (360 MPa), the top charges use 73–90 %, leaving at least 10 % headroom. The 700.0 gr projectile in 0.51" calls for a 1:16.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, Vihtavuori 20N29 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2218, Alliant Reloder-50, Alliant Reloder-33 rank at the top here: for .510 DTC with the .510 | 700gr | General Dynamics FMJ they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Hodgdon 50BMG, Hodgdon US 869, Lovex D100 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data