Load data for .460 Steyr + .458 | 425gr | Rhino Penetrator

.460 Steyr cartridge drawing
Rhino Bullets logo

Load Specifications

Bullet Manufacturer:Rhino Bullets
Bullet Weight:425 gr
Bullet Diameter:0.458"
Bullet Length:<<locked>>
Case Length (l3):3.538"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:263.37 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:25.6"
Max. allowed Pressure:53,664 psi
Recommended Twist Rate:1:6.0

Load data in caliber .460 Steyr with .458 | 425gr | Rhino Penetrator bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 80, ADI AR 2225 and IMR 8133 Enduron.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
ADI AR 2213<<locked>>82%48,457 psi90%2877 fps99.2%
ADI AR 2217<<locked>>90%47,471 psi88%2867 fps99.4%
ADI AR 2218<<locked>>94%47,181 psi88%2956 fps96.4%
ADI AR 2225<<locked>>92%46,688 psi87%2894 fps100%
Alliant Reloder-23<<locked>>82%47,834 psi89%2802 fps100%
Alliant Reloder-25<<locked>>86%47,935 psi89%2871 fps100%
Alliant Reloder-50<<locked>>96%48,559 psi90%2933 fps96.2%
Baschieri & Pellagri 109<<locked>>82%46,035 psi86%2785 fps96.4%
Bofors RP15<<locked>>82%45,745 psi85%2812 fps99.4%
Bofors RP30<<locked>>88%47,761 psi89%2881 fps99.4%
Hodgdon H1000<<locked>>88%48,530 psi90%2884 fps99.7%
Hodgdon Retumbo<<locked>>86%46,992 psi88%2943 fps100%
Hodgdon TrailBossᴾ<<locked>>100%37,913 psi71%1883 fps100%
IMR 7828 SSC<<locked>>82%47,195 psi88%2864 fps99%
IMR 8133 Enduron<<locked>>94%46,151 psi86%2867 fps99.1%
Lovex S071<<locked>>86%47,979 psi89%2772 fps100%
Norma 217<<locked>>94%47,094 psi88%2894 fps100%
Ramshot Grand<<locked>>82%47,776 psi89%2884 fps99.4%
Ramshot Magnum<<locked>>84%46,354 psi86%2815 fps99.9%
ReloadSwiss RS 14ᴾ<<locked>>100%38,957 psi73%1929 fps100%
ReloadSwiss RS 76<<locked>>86%46,804 psi87%2927 fps100%
ReloadSwiss RS 80<<locked>>88%46,325 psi86%2884 fps98.1%
Vihtavuori N165<<locked>>82%46,659 psi87%2759 fps99.8%
Vihtavuori N565<<locked>>84%46,369 psi86%2831 fps98.6%
Vihtavuori N568<<locked>>88%47,282 psi88%2894 fps97.9%
Vihtavuori N570<<locked>>90%48,356 psi90%2953 fps96.3%
Winchester StaBALL HD<<locked>>82%47,152 psi88%2877 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
ADI AR 2213<<locked>>80%45,165 psi84%2815 fps98.6%
ADI AR 2217<<locked>>80%33,736 psi63%2549 fps95.5%
ADI AR 2218<<locked>>92%43,888 psi82%2881 fps95.2%
ADI AR 2225181.2 gr80%31,082 psi58%2520 fps97.5%
Alliant Reloder-23<<locked>>80%44,802 psi83%2746 fps100%
Alliant Reloder-25<<locked>>80%38,943 psi73%2694 fps100%
Alliant Reloder-50<<locked>>94%45,092 psi84%2861 fps95.1%
Baschieri & Pellagri 109<<locked>>80%43,192 psi80%2723 fps95.6%
Bofors RP15<<locked>>80%42,815 psi80%2753 fps98.9%
Bofors RP30<<locked>>80%36,390 psi68%2628 fps96.7%
Hodgdon H1000<<locked>>80%36,738 psi68%2631 fps97.4%
Hodgdon Retumbo<<locked>>80%38,087 psi71%2746 fps98.8%
Hodgdon TrailBoss<<locked>>80%28,485 psi53%1683 fps100%
IMR 7828 SSC<<locked>>80%44,034 psi82%2799 fps98.4%
IMR 8133 Enduron189.5 gr86%35,215 psi66%2618 fps96%
Lovex S071<<locked>>80%39,668 psi74%2612 fps99.8%
Norma 217<<locked>>80%28,863 psi54%2457 fps95.4%
Ramshot Grand<<locked>>80%44,411 psi83%2815 fps98.8%
Ramshot Magnum<<locked>>80%39,972 psi74%2687 fps99.1%
ReloadSwiss RS 14<<locked>>80%29,283 psi55%1722 fps100%
ReloadSwiss RS 76<<locked>>80%37,347 psi70%2720 fps99.4%
ReloadSwiss RS 80200.4 gr82%37,028 psi69%2674 fps95.1%
Vihtavuori N165<<locked>>80%43,729 psi81%2703 fps99.5%
Vihtavuori N565<<locked>>80%40,524 psi76%2707 fps97.3%
Vihtavuori N568<<locked>>82%38,189 psi71%2694 fps95%
Vihtavuori N570<<locked>>88%45,020 psi84%2881 fps95.3%
Winchester StaBALL HD<<locked>>80%43,787 psi82%2818 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .460 Steyr loaded with the .458 | 425gr | Rhino Penetrator. ADI AR 2218 delivers the highest muzzle velocity at 2,956 fps; across all powders the maximum-charge window runs from 1,883 fps to 2,956 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (370 MPa), the top charges use 71–90 %, leaving at least 10 % headroom. The 425.0 gr projectile in 0.458" calls for a 1:6.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 80, ADI AR 2225, IMR 8133 Enduron rank at the top here: for .460 Steyr with the .458 | 425gr | Rhino Penetrator they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data