Load data for .450 Short + .452 | 160gr | LEE Mold 452-160-RF

.450 Short cartridge drawing
LEE logo

Load Specifications

Bullet Manufacturer:LEE
Bullet Weight:160 gr
Bullet Diameter:0.452"
Bullet Length:<<locked>>
Case Length (l3):0.693"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:16 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:5"
Max. allowed Pressure:10,443 psi

Load data in caliber .450 Short with .452 | 160gr | LEE Mold 452-160-RF bullet and 6 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Baschieri & Pellagri 102 Pistol*<<locked>>88%9,413 psi90%817 fps91%
Baschieri & Pellagri 103 Pistol*²<<locked>>64%8,615 psi83%784 fps87.8%
Maxam CSB 2*<<locked>>80%9,413 psi90%866 fps90%
ReloadSwiss RS 12*²<<locked>>68%8,876 psi85%856 fps92.8%
Vihtavuori N320*²<<locked>>64%8,978 psi86%801 fps91.2%
Vihtavuori N32C Tin Starᴾ<<locked>>100%8,934 psi86%804 fps98.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Baschieri & Pellagri 102 Pistol*<<locked>>80%7,513 psi72%745 fps86.5%
Baschieri & Pellagri 103 Pistol*²<<locked>>60%7,644 psi73%748 fps85.2%
Maxam CSB 2*²<<locked>>76%8,137 psi78%814 fps86.9%
ReloadSwiss RS 12*²<<locked>>60%6,846 psi66%768 fps87.5%
Vihtavuori N320*²<<locked>>60%7,600 psi73%745 fps87.8%
Vihtavuori N32C Tin Star*²3 gr68%4,279 psi41%584 fps85.8%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 6 powders for .450 Short loaded with the .452 | 160gr | LEE Mold 452-160-RF. Maxam CSB 2 delivers the highest muzzle velocity at 866 fps; across all powders the maximum-charge window runs from 784 fps to 866 fps. Vihtavuori N32C Tin Star gives the best case fill at 100 %, and 3 of the 6 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (72 MPa), the top charges use 83–90 %, leaving at least 10 % headroom. Vihtavuori N32C Tin Star reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star rank at the top here: for .450 Short with the .452 | 160gr | LEE Mold 452-160-RF they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Baschieri & Pellagri 102 Pistol, Baschieri & Pellagri 103 Pistol, Maxam CSB 2 burn incompletely and react more sensitively to barrel length and temperature. Baschieri & Pellagri 102 Pistol, Baschieri & Pellagri 103 Pistol, Maxam CSB 2 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data