top of page

Load data for .450 Short + .451 | 150gr | Rim Rock SWC

Recommended Powder(s): none

.450 Short + .451 | 150gr | Rim Rock SWC

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.451 | 150gr | Rim Rock SWC
Manufacturer SKU:
#142
Bullet Weight:
150gr | 9.7g
Bullet Diameter:
0.451" | 11.46mm
Bullet Length:
0.570" | 14.5mm
Caliber:
.450 Short load data
Case Length (l3):
0.693" | 17.6mm
Cartridge Length (C.O.L.):
1.030" | 26.2mm
Seated Depth:
0.233" | 5.9mm
Shank Seated Depth:
0.233" | 5.9mm
Case Capacity:
16.0 Grains of Water | 1.04 cm³
Primer Size:
Small Pistol (SP)
Max. allowed Pressure:
10443 psi | 720 bar
LID:
LID_B10642_C770
Last updated:
2025-01-01

Load data for 10 loads in caliber .450 Short with .451 | 150gr | Rim Rock SWC bullet and 5 powders such as none. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AS 50N]*
<<locked>>
70%
9123
87%
**5
83%
[Maxam CSB 4]*
<<locked>>
72%
8775
84%
**9
83%
[ReloadSwiss RS 12]*
<<locked>>
83%
8818
84%
**1
85%
Rottweil P 801
<<locked>>
76%
9181
88%
**7
91%
[Vihtavuori N320]*
<<locked>>
78%
9166
88%
**5
84%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AS 50N]*
<<locked>>
65%
8108
78%
**3
80%
[Maxam CSB 4]*
<<locked>>
67%
7948
76%
**6
81%
[ReloadSwiss RS 12]*
<<locked>>
76%
7411
71%
**5
81%
[Rottweil P 801]*
<<locked>>
61%
6164
59%
**6
82%
[Vihtavuori N320]*
<<locked>>
73%
8267
79%
**9
81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page