
Load Specifications
Load data in caliber .450 Marlin with .458 | 350gr | Alaska Bullet Works Kodiak FN SPFN bullet and 21 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 36, ADI AR 2207 and Alliant Reloder-7.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 94% | 41,814 psi | 87% | 2028 fps | 96.7% |
| Accurate No. 11 FS | <<locked>> | 82% | 41,916 psi | 88% | 2014 fps | 99.7% |
| ADI AR 2205 | <<locked>> | 84% | 41,582 psi | 87% | 1942 fps | 100% |
| ADI AR 2207ᴾ | <<locked>> | 100% | 41,046 psi | 86% | 2106 fps | 99.7% |
| Alliant Reloder-7 | <<locked>> | 98% | 41,423 psi | 87% | 2067 fps | 97.5% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 28,413 psi | 59% | 1237 fps | 100% |
| IMR 4198ᴾ | <<locked>> | 100% | 38,000 psi | 79% | 2005 fps | 96.8% |
| IMR 4227 | <<locked>> | 92% | 42,380 psi | 89% | 2028 fps | 99.1% |
| Lovex D060 | <<locked>> | 84% | 41,713 psi | 87% | 2024 fps | 97.7% |
| Lovex D063 | <<locked>> | 82% | 42,844 psi | 90% | 2037 fps | 98% |
| Lovex S053 | <<locked>> | 94% | 42,656 psi | 89% | 2034 fps | 100% |
| Norma 200ᴾ | <<locked>> | 100% | 37,536 psi | 78% | 2067 fps | 97.1% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 27,746 psi | 58% | 1266 fps | 100% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 20,494 psi | 43% | 1132 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 94% | 43,105 psi | 90% | 2083 fps | 99.1% |
| Shooters World Blackout | <<locked>> | 82% | 42,844 psi | 90% | 2037 fps | 98% |
| Shooters World Buffalo Rifle | <<locked>> | 84% | 41,713 psi | 87% | 2024 fps | 97.7% |
| Shooters World SOCOM | <<locked>> | 84% | 40,886 psi | 85% | 2001 fps | 98.1% |
| SNPE Vectan BA6 1/2 | <<locked>> | 96% | 41,800 psi | 87% | 1916 fps | 100% |
| Vihtavuori N110 | <<locked>> | 88% | 42,931 psi | 90% | 1982 fps | 100% |
| Vihtavuori N120ᴾ | <<locked>> | 100% | 41,466 psi | 87% | 2077 fps | 100% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 90% | 36,811 psi | 77% | 1952 fps | 95.4% |
| Accurate No. 11 FS | <<locked>> | 80% | 39,320 psi | 82% | 1978 fps | 99.5% |
| ADI AR 2205 | <<locked>> | 80% | 36,825 psi | 77% | 1873 fps | 99.9% |
| ADI AR 2207 | 37.2 gr | 82% | 24,134 psi | 50% | 1785 fps | 95.4% |
| Alliant Reloder-7 | 42.3 gr | 90% | 32,677 psi | 68% | 1923 fps | 95.1% |
| Hodgdon TrailBoss | <<locked>> | 80% | 20,682 psi | 43% | 1102 fps | 100% |
| IMR 4198 | <<locked>> | 96% | 34,258 psi | 72% | 1939 fps | 95.6% |
| IMR 4227 | <<locked>> | 80% | 29,660 psi | 62% | 1814 fps | 96.1% |
| Lovex D060 | <<locked>> | 80% | 37,173 psi | 78% | 1949 fps | 96.6% |
| Lovex D063 | <<locked>> | 80% | 40,161 psi | 84% | 1998 fps | 97.5% |
| Lovex S053 | <<locked>> | 80% | 28,718 psi | 60% | 1808 fps | 98.9% |
| Norma 200 | <<locked>> | 94% | 31,111 psi | 65% | 1952 fps | 95.1% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 20,131 psi | 42% | 1125 fps | 100% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 15,055 psi | 31% | 1007 fps | 100% |
| ReloadSwiss RS 36 | 37.8 gr | 80% | 28,224 psi | 59% | 1827 fps | 95.4% |
| Shooters World Blackout | <<locked>> | 80% | 40,161 psi | 84% | 1998 fps | 97.5% |
| Shooters World Buffalo Rifle | <<locked>> | 80% | 37,173 psi | 78% | 1949 fps | 96.6% |
| Shooters World SOCOM | <<locked>> | 80% | 35,998 psi | 75% | 1923 fps | 97% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 27,557 psi | 58% | 1706 fps | 100% |
| Vihtavuori N110 | <<locked>> | 80% | 34,156 psi | 71% | 1860 fps | 100% |
| Vihtavuori N120 | <<locked>> | 80% | 23,192 psi | 48% | 1732 fps | 96.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 21 powders for .450 Marlin loaded with the .458 | 350gr | Alaska Bullet Works Kodiak FN SPFN. ADI AR 2207 delivers the highest muzzle velocity at 2,106 fps; across all powders the maximum-charge window runs from 1,132 fps to 2,106 fps. ADI AR 2207 gives the best case fill at 100 %, and 21 of the 21 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (330 MPa), the top charges use 43–90 %, leaving at least 10 % headroom. ADI AR 2207, Hodgdon TrailBoss, IMR 4198 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 36, ADI AR 2207, Alliant Reloder-7 rank at the top here: for .450 Marlin with the .458 | 350gr | Alaska Bullet Works Kodiak FN SPFN they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss, ReloadSwiss RS 14 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.