
Load Specifications
Load data in caliber .450 Marlin with .458 | 250gr | Impala LWHV LS bullet and 9 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N110, Lovex S053 and ADI AR 2205.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate No. 11 FS | <<locked>> | 88% | 41,989 psi | 88% | 2372 fps | 96.8% |
| ADI AR 2205 | <<locked>> | 90% | 42,366 psi | 89% | 2300 fps | 98.5% |
| Hodgdon LilGun | <<locked>> | 84% | 41,510 psi | 87% | 2448 fps | 100% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 27,166 psi | 57% | 1463 fps | 100% |
| Lovex S040 | <<locked>> | 82% | 41,466 psi | 87% | 2293 fps | 100% |
| Lovex S053ᴾ | <<locked>> | 100% | 41,582 psi | 87% | 2388 fps | 98.4% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 26,498 psi | 55% | 1496 fps | 100% |
| SNPE Vectan BA6 1/2ᴾ | <<locked>> | 100% | 38,870 psi | 81% | 2254 fps | 100% |
| Vihtavuori N110 | <<locked>> | 94% | 42,134 psi | 88% | 2362 fps | 100% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate No. 11 FS | <<locked>> | 84% | 37,347 psi | 78% | 2287 fps | 95.6% |
| ADI AR 2205 | 37.5 gr | 80% | 32,169 psi | 67% | 2106 fps | 96% |
| Hodgdon LilGun | <<locked>> | 80% | 36,738 psi | 77% | 2365 fps | 100% |
| Hodgdon TrailBoss | <<locked>> | 80% | 20,204 psi | 42% | 1306 fps | 100% |
| Lovex S040 | <<locked>> | 80% | 39,421 psi | 82% | 2260 fps | 100% |
| Lovex S053 | 38.9 gr | 88% | 30,501 psi | 64% | 2165 fps | 95.5% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 19,653 psi | 41% | 1335 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 23,989 psi | 50% | 1939 fps | 99.3% |
| Vihtavuori N110 | 33.8 gr | 80% | 29,008 psi | 61% | 2110 fps | 99.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 9 powders for .450 Marlin loaded with the .458 | 250gr | Impala LWHV LS. Hodgdon LilGun delivers the highest muzzle velocity at 2,448 fps; across all powders the maximum-charge window runs from 1,463 fps to 2,448 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 9 of the 9 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (330 MPa), the top charges use 55–89 %, leaving at least 11 % headroom. Hodgdon TrailBoss, Lovex S053, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N110, Lovex S053, ADI AR 2205 rank at the top here: for .450 Marlin with the .458 | 250gr | Impala LWHV LS they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.