
Load Specifications
Load data in caliber .450 Marlin with .458 | 250gr | Barnes X FN bullet and 9 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N110, ADI AR 2205 and SNPE Vectan BA6 1/2.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate No. 11 FS | <<locked>> | 90% | 42,656 psi | 89% | 2349 fps | 96.4% |
| ADI AR 2205 | <<locked>> | 92% | 43,250 psi | 90% | 2283 fps | 98.3% |
| Hodgdon LilGun | <<locked>> | 86% | 41,916 psi | 88% | 2428 fps | 100% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 26,760 psi | 56% | 1434 fps | 100% |
| Lovex S040 | <<locked>> | 84% | 42,235 psi | 88% | 2280 fps | 100% |
| Lovex S053ᴾ | <<locked>> | 100% | 39,682 psi | 83% | 2326 fps | 97.7% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 26,092 psi | 55% | 1467 fps | 100% |
| SNPE Vectan BA6 1/2ᴾ | <<locked>> | 100% | 37,057 psi | 77% | 2201 fps | 100% |
| Vihtavuori N110 | <<locked>> | 96% | 42,453 psi | 89% | 2339 fps | 100% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate No. 11 FS | <<locked>> | 86% | 37,840 psi | 79% | 2267 fps | 95.1% |
| ADI AR 2205 | 35.7 gr | 80% | 31,067 psi | 65% | 2054 fps | 95.1% |
| Hodgdon LilGun | <<locked>> | 80% | 34,679 psi | 72% | 2306 fps | 100% |
| Hodgdon TrailBoss | <<locked>> | 80% | 19,783 psi | 41% | 1280 fps | 100% |
| Lovex S040 | <<locked>> | 80% | 37,971 psi | 79% | 2208 fps | 99.8% |
| Lovex S053 | <<locked>> | 90% | 30,734 psi | 64% | 2146 fps | 95% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 19,421 psi | 41% | 1312 fps | 100% |
| SNPE Vectan BA6 1/2 | 30.8 gr | 80% | 23,047 psi | 48% | 1890 fps | 98.8% |
| Vihtavuori N110 | 32.2 gr | 80% | 27,818 psi | 58% | 2057 fps | 98.9% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 9 powders for .450 Marlin loaded with the .458 | 250gr | Barnes X FN. Hodgdon LilGun delivers the highest muzzle velocity at 2,428 fps; across all powders the maximum-charge window runs from 1,434 fps to 2,428 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 9 of the 9 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (330 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, Lovex S053, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N110, ADI AR 2205, SNPE Vectan BA6 1/2 rank at the top here: for .450 Marlin with the .458 | 250gr | Barnes X FN they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.