top of page

Load data for .450 Bushmaster + .452 | 240gr | Hornady XTP MAG

Recommended Powder(s): Vihtavuori N110

.450 Bushmaster + .452 | 240gr | Hornady XTP MAG

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.452 | 240gr | Hornady XTP MAG
Manufacturer SKU:
45220
Bullet Weight:
240gr | 15.6g
Bullet Diameter:
0.452" | 11.48mm
Bullet Length:
0.672" | 17.1mm
Caliber:
.450 Bushmaster load data
Case Length (l3):
1.700" | 43.2mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.146" | 3.7mm
Shank Seated Depth:
0.146" | 3.7mm
Case Capacity:
60.0 Grains of Water | 3.90 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
39160 psi | 2700 bar
LID:
LID_B2869_C759
Last updated:
2025-02-02

Load data for 30 loads in caliber .450 Bushmaster with .452 | 240gr | Hornady XTP MAG bullet and 15 powders such as Vihtavuori N110. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 18.5 fps

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
88%
38566
98%
**47
98%
[ADI AR 2207]*
<<locked>>
96%
27905
71%
**98
93%
[Accurate 5744]*
<<locked>>
86%
38696
99%
**20
93%
Accurate No. 11 FS
<<locked>>
87%
39044
100%
**26
97%
Hodgdon LilGun
<<locked>>
84%
39059
100%
**11
100%
IMR 4227
<<locked>>
96%
38290
98%
**06
95%
[Lovex D060]*
<<locked>>
88%
38377
98%
**10
93%
[Lovex D063]*
<<locked>>
85%
38580
99%
**03
93%
Lovex S053
<<locked>>
97%
36376
93%
**06
98%
[ReloadSwiss RS 36]*
<<locked>>
96%
36332
93%
**20
94%
SNPE Vectan BA6 1/2
<<locked>>
97%
33910
87%
**82
100%
[Shooters World Blackout]*
<<locked>>
85%
38580
99%
**03
93%
[Shooters World Buffalo Rifle]*
<<locked>>
88%
38377
98%
**10
93%
Vihtavuori N110 👍
<<locked>>
93%
38421
98%
**20
100%
[Vihtavuori N120]*
<<locked>>
97%
26585
68%
**33
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
30835
79%
**00
97%
[ADI AR 2207]*
<<locked>>
92%
24221
62%
**00
90%
[Accurate 5744]*
<<locked>>
81%
33011
84%
**01
91%
Accurate No. 11 FS
<<locked>>
81%
31662
81%
**88
95%
Hodgdon LilGun
<<locked>>
81%
35027
89%
**46
100%
[IMR 4227]*
<<locked>>
85%
27282
70%
**80
90%
[Lovex D060]*
<<locked>>
82%
31995
82%
**78
90%
[Lovex D063]*
<<locked>>
81%
33286
85%
**01
91%
[Lovex S053]*
<<locked>>
81%
22365
57%
**88
93%
[ReloadSwiss RS 36]*
<<locked>>
87%
27224
70%
**23
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
21480
55%
**16
99%
[Shooters World Blackout]*
<<locked>>
81%
33286
85%
**01
91%
[Shooters World Buffalo Rifle]*
<<locked>>
82%
31995
82%
**78
90%
Vihtavuori N110
<<locked>>
81%
26774
68%
**00
99%
[Vihtavuori N120]*
<<locked>>
90%
21785
56%
**91
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page