Load data for .45 Glock Auto Pistol + .452 | 250gr | CamPro RNFP

Recommended Powder(s): Hodgdon Universal, Vihtavuori N330

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.452 \| 250gr \| CamPro RNFP
Bullet Weight:	250gr \| 16.2g
Bullet Diameter:	0.452" \| 11.48mm
Bullet Length:	0.650" \| 16.5mm
Caliber:	.45 Glock Auto Pistol load data
Case Length (l3):	0.759" \| 19.3mm
Cartridge Length (C.O.L.):	1.119" \| 28.4mm
Seated Depth:	0.290" \| 7.4mm
Shank Seated Depth:	0.290" \| 7.4mm
Case Capacity:	22.3 Grains of Water \| 1.45 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	18855 psi \| 1300 bar
LID:	LID_B10036_C733
Last updated:	2025-01-01

Load data for 44 loads in caliber .45 Glock Auto Pistol with .452 | 250gr | CamPro RNFP bullet and 22 powders such as Hodgdon Universal, Vihtavuori N330. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate No. 2	<<locked>>	67%	16781	89%	**1	91%
Accurate Solo 1250	<<locked>>	72%	16085	85%	**4	99%
Alliant UNIQUE	<<locked>>	71%	15722	83%	**7	94%
Baschieri & Pellagri 100	<<locked>>	66%	16360	87%	**8	100%
Hodgdon Universal 👍	<<locked>>	67%	16868	89%	**7	99%
Lovex S020	<<locked>>	66%	15490	82%	**4	96%
Maxam CSB 1	<<locked>>	72%	15432	82%	**8	98%
Maxam CSB 2	<<locked>>	76%	16085	85%	**4	100%
Maxam CSB 3	<<locked>>	66%	15577	83%	**1	100%
ReloadSwiss RS 20	<<locked>>	76%	15708	83%	**1	96%
[Rottweil P 806]*	<<locked>>	95%	16346	87%	**2	85%
SNPE Vectan A0	<<locked>>	72%	15679	83%	**5	93%
SNPE Vectan BA 9	<<locked>>	66%	16868	89%	**1	97%
[SNPE Vectan BA7 1/2]*	<<locked>>	78%	15113	80%	**5	83%
SNPE Vectan BA9 1/2	<<locked>>	66%	15795	84%	**8	98%
Somchem MP200	<<locked>>	65%	15548	82%	**8	92%
Somchem MS200	<<locked>>	70%	16839	89%	**4	95%
[Vihtavuori 3N37]*	<<locked>>	78%	16476	87%	**4	87%
Vihtavuori N32C Tin Star	<<locked>>	86%	15026	80%	**9	100%
Vihtavuori N330 👍	<<locked>>	71%	16157	86%	**7	100%
Vihtavuori N340	<<locked>>	72%	15954	85%	**8	94%
[Vihtavuori N350]*	<<locked>>	78%	15418	82%	**4	85%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[Accurate No. 2]*	<<locked>>	62%	14388	76%	**5	88%
Accurate Solo 1250	<<locked>>	61%	12067	64%	**2	96%
[Alliant UNIQUE]*	<<locked>>	62%	11908	63%	**2	89%
Baschieri & Pellagri 100	<<locked>>	61%	13938	74%	**6	100%
Hodgdon Universal	<<locked>>	62%	14620	78%	**5	98%
Lovex S020	<<locked>>	62%	13590	72%	**2	94%
Maxam CSB 1	<<locked>>	62%	11574	61%	**6	95%
Maxam CSB 2	<<locked>>	60%	10066	53%	**9	99%
Maxam CSB 3	<<locked>>	61%	13300	71%	**9	99%
[ReloadSwiss RS 20]*	<<locked>>	61%	10617	56%	**9	89%
[Rottweil P 806]*	<<locked>>	89%	13431	71%	**7	81%
[SNPE Vectan A0]*	<<locked>>	62%	11995	64%	**6	88%
SNPE Vectan BA 9	<<locked>>	62%	14707	78%	**2	96%
[SNPE Vectan BA7 1/2]*	<<locked>>	74%	13431	71%	**9	81%
SNPE Vectan BA9 1/2	<<locked>>	61%	13750	73%	**9	97%
[Somchem MP200]*	<<locked>>	60%	13605	72%	**5	89%
Somchem MS200	<<locked>>	61%	12995	69%	**2	91%
[Vihtavuori 3N37]*	<<locked>>	70%	13068	69%	**1	82%
Vihtavuori N32C Tin Star	<<locked>>	79%	12807	68%	**3	100%
Vihtavuori N330	<<locked>>	61%	11980	64%	**5	97%
Vihtavuori N340	<<locked>>	62%	12067	64%	**6	90%
[Vihtavuori N350]*	<<locked>>	70%	12038	64%	**9	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data