Load data for .45 Glock Auto Pistol + .452 | 230gr | Sellier & Bellot FMJ

Recommended Powder(s): Maxam CSB 2

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.452 \| 230gr \| Sellier & Bellot FMJ
Manufacturer SKU:	31887
Bullet Weight:	230gr \| 14.9g
Bullet Diameter:	0.452" \| 11.48mm
Bullet Length:	0.657" \| 16.7mm
Caliber:	.45 Glock Auto Pistol load data
Case Length (l3):	0.759" \| 19.3mm
Cartridge Length (C.O.L.):	1.119" \| 28.4mm
Seated Depth:	0.297" \| 7.5mm
Shank Seated Depth:	0.297" \| 7.5mm
Case Capacity:	22.3 Grains of Water \| 1.45 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	18855 psi \| 1300 bar
LID:	LID_B7261_C733
Last updated:	2025-01-01

Load data for 48 loads in caliber .45 Glock Auto Pistol with .452 | 230gr | Sellier & Bellot FMJ bullet and 24 powders such as Maxam CSB 2. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AS 30	<<locked>>	66%	16810	89%	**5	100%
[Accurate No. 2]*	<<locked>>	66%	15258	81%	**1	87%
Accurate Solo 1250	<<locked>>	76%	16969	90%	**0	98%
Alliant UNIQUE	<<locked>>	76%	16085	85%	**0	92%
Baschieri & Pellagri 100	<<locked>>	65%	14750	78%	**1	99%
Hodgdon Universal	<<locked>>	66%	15055	80%	**7	98%
Lovex S020	<<locked>>	70%	16230	86%	**4	95%
Maxam CSB 1	<<locked>>	77%	16056	85%	**1	98%
Maxam CSB 2 👍	<<locked>>	78%	15171	80%	**7	100%
Maxam CSB 3	<<locked>>	68%	15127	80%	**4	99%
Maxam CSB 4	<<locked>>	66%	15751	84%	**8	100%
ReloadSwiss RS 12	<<locked>>	66%	15069	80%	**4	100%
ReloadSwiss RS 20	<<locked>>	80%	15911	84%	**0	94%
SNPE Vectan A0	<<locked>>	76%	16375	87%	**7	92%
SNPE Vectan BA 9	<<locked>>	66%	15316	81%	**4	95%
SNPE Vectan BA9 1/2	<<locked>>	71%	16520	88%	**1	98%
[Somchem MP200]*	<<locked>>	66%	14823	79%	**4	89%
Somchem MS200	<<locked>>	70%	15519	82%	**4	92%
[Vihtavuori 3N37]*	<<locked>>	82%	16969	90%	**3	85%
Vihtavuori N320	<<locked>>	67%	15185	81%	**1	100%
Vihtavuori N32C Tin Star	<<locked>>	95%	16346	87%	**4	100%
Vihtavuori N330	<<locked>>	75%	16491	87%	**3	99%
Vihtavuori N340	<<locked>>	76%	16752	89%	**7	93%
[Vihtavuori N350]*	<<locked>>	83%	16027	85%	**3	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AS 30	<<locked>>	60%	14214	75%	**9	100%
[Accurate No. 2]*	<<locked>>	61%	13111	70%	**2	84%
Accurate Solo 1250	<<locked>>	60%	10588	56%	**6	92%
[Alliant UNIQUE]*	<<locked>>	61%	10660	57%	**6	85%
Baschieri & Pellagri 100	<<locked>>	60%	12459	66%	**6	98%
Hodgdon Universal	<<locked>>	61%	13068	69%	**5	96%
Lovex S020	<<locked>>	61%	12038	64%	**8	90%
Maxam CSB 1	<<locked>>	61%	10312	55%	**3	92%
Maxam CSB 2	<<locked>>	62%	9587	51%	**9	97%
Maxam CSB 3	<<locked>>	62%	12792	68%	**9	98%
Maxam CSB 4	<<locked>>	61%	13547	72%	**5	100%
ReloadSwiss RS 12	<<locked>>	61%	12923	69%	**1	100%
[ReloadSwiss RS 20]*	<<locked>>	61%	9514	50%	**9	84%
[SNPE Vectan A0]*	<<locked>>	61%	11052	59%	**6	84%
SNPE Vectan BA 9	<<locked>>	61%	13547	72%	**5	93%
SNPE Vectan BA9 1/2	<<locked>>	60%	12415	66%	**9	94%
[Somchem MP200]*	<<locked>>	62%	13155	70%	**5	87%
[Somchem MS200]*	<<locked>>	60%	11777	62%	**9	88%
[Vihtavuori 3N37]*	<<locked>>	74%	13314	71%	**4	80%
Vihtavuori N320	<<locked>>	61%	12821	68%	**5	100%
Vihtavuori N32C Tin Star	<<locked>>	75%	10515	56%	**3	100%
Vihtavuori N330	<<locked>>	60%	10704	57%	**9	94%
[Vihtavuori N340]*	<<locked>>	61%	10863	58%	**9	86%
[Vihtavuori N350]*	<<locked>>	78%	14083	75%	**1	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.