Load data for .45 Glock Auto Pistol + .452 | 200gr | H&N SWC KB

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.452 \| 200gr \| H&N SWC KB
Bullet Weight:	200gr \| 13.0g
Bullet Diameter:	0.452" \| 11.48mm
Bullet Length:	<<locked>>
Caliber:	.45 Glock Auto Pistol load data
Case Length (l3):	0.759" \| 19.3mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	22.3 Grains of Water \| 1.45 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	18855 psi \| 1300 bar
LID:	LID_B7536_C733
Last updated:	2026-01-21

Load data for 46 loads in caliber .45 Glock Auto Pistol with .452 | 200gr | H&N SWC KB bullet and 23 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	63%	16911	90%	**4	99%
Alliant BULLSEYE	<<locked>>	64%	16955	90%	**8	94%
Alliant UNIQUE	<<locked>>	75%	16172	86%	**4	93%
Baschieri & Pellagri 102 Pistol	<<locked>>	91%	16737	89%	**5	100%
Baschieri & Pellagri 103 Pistol	<<locked>>	68%	16897	90%	**1	100%
Hodgdon Universal 👍	<<locked>>	70%	16911	90%	**4	99%
Hodgdon CFE Pistol	<<locked>>	72%	16897	90%	**8	98%
Lovex S020	<<locked>>	70%	16476	87%	**1	96%
Maxam CSB 2	<<locked>>	80%	16940	90%	**04	100%
ReloadSwiss RS 12	<<locked>>	69%	16955	90%	**4	100%
ReloadSwiss RS 20	<<locked>>	79%	16650	88%	**04	96%
Rottweil P 801	<<locked>>	62%	16969	90%	**1	100%
[Rottweil P 806]*	<<locked>>	97%	16360	87%	**89	83%
SNPE Vectan A0	<<locked>>	75%	16694	89%	**8	93%
[SNPE Vectan BA7 1/2]*	<<locked>>	82%	16302	86%	**5	84%
SNPE Vectan BA9 1/2	<<locked>>	69%	16404	87%	**8	98%
Somchem MP200	<<locked>>	69%	16563	88%	**1	92%
Somchem MS200	<<locked>>	72%	16853	89%	**5	95%
[Vihtavuori 3N37]*	<<locked>>	80%	16795	89%	**01	86%
Vihtavuori N320	<<locked>>	68%	16491	87%	**5	100%
Vihtavuori N330 👍	<<locked>>	72%	16259	86%	**4	99%
Vihtavuori N340	<<locked>>	75%	16708	89%	**1	94%
[Vihtavuori N350]*	<<locked>>	83%	16781	89%	**4	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	61%	16012	85%	**8	99%
Alliant BULLSEYE	<<locked>>	60%	15113	80%	**2	93%
Alliant UNIQUE	<<locked>>	69%	13663	72%	**9	91%
Baschieri & Pellagri 102 Pistol	<<locked>>	87%	14866	79%	**2	100%
Baschieri & Pellagri 103 Pistol	<<locked>>	65%	15273	81%	**8	100%
Hodgdon Universal	<<locked>>	66%	15026	80%	**5	98%
Hodgdon CFE Pistol	<<locked>>	68%	15069	80%	**8	97%
Lovex S020	<<locked>>	66%	14547	77%	**8	94%
Maxam CSB 2	<<locked>>	72%	13256	70%	**5	100%
ReloadSwiss RS 12	<<locked>>	63%	14199	75%	**2	100%
ReloadSwiss RS 20	<<locked>>	72%	13431	71%	**5	93%
Rottweil P 801	<<locked>>	60%	16143	86%	**2	100%
[Rottweil P 806]*	<<locked>>	92%	13895	74%	**27	80%
SNPE Vectan A0	<<locked>>	74%	15911	84%	**2	92%
[SNPE Vectan BA7 1/2]*	<<locked>>	79%	14968	79%	**9	82%
SNPE Vectan BA9 1/2	<<locked>>	67%	15519	82%	**5	98%
Somchem MP200	<<locked>>	66%	14982	79%	**2	90%
Somchem MS200	<<locked>>	69%	15156	80%	**5	93%
[Vihtavuori 3N37]*	<<locked>>	74%	13808	73%	**8	82%
Vihtavuori N320	<<locked>>	66%	15418	82%	**2	100%
Vihtavuori N330	<<locked>>	67%	13605	72%	**2	98%
Vihtavuori N340	<<locked>>	71%	15026	80%	**2	92%
[Vihtavuori N350]*	<<locked>>	76%	13793	73%	**2	82%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data