Load data for .45 Glock Auto Pistol + .451 | 200gr | Lehigh Defense Extreme Penetrator

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.451 \| 200gr \| Lehigh Defense Extreme Penetrator
Manufacturer SKU:	07451200SPFC
Bullet Weight:	200gr \| 13.0g
Bullet Diameter:	0.451" \| 11.46mm
Bullet Length:	<<locked>>
Caliber:	.45 Glock Auto Pistol load data
Case Length (l3):	0.759" \| 19.3mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	22.3 Grains of Water \| 1.45 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	18855 psi \| 1300 bar
LID:	LID_B12386_C733
Last updated:	2026-06-17

Load data for 40 loads in caliber .45 Glock Auto Pistol with .451 | 200gr | Lehigh Defense Extreme Penetrator bullet and 20 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	62%	16839	89%	**6	97%
Accurate Solo 1250	<<locked>>	77%	16940	90%	**6	96%
Alliant BE-86	<<locked>>	76%	16868	89%	**6	98%
Alliant BULLSEYE	<<locked>>	64%	16665	88%	**3	90%
[Alliant Herco]*	<<locked>>	89%	16186	86%	**6	89%
Alliant UNIQUE	<<locked>>	76%	16897	90%	**3	90%
Baschieri & Pellagri 102 Pistol	<<locked>>	92%	16476	87%	**3	100%
Baschieri & Pellagri 103 Pistol	<<locked>>	70%	16853	89%	**9	100%
Hodgdon CFE Pistol	<<locked>>	71%	16708	89%	**6	95%
Hodgdon Universal	<<locked>>	69%	16839	89%	**6	97%
Lovex S020	<<locked>>	71%	16534	88%	**3	92%
Maxam CSB 2	<<locked>>	81%	16694	89%	**6	100%
[Ramshot Silhouette]*	<<locked>>	64%	16911	90%	**3	87%
ReloadSwiss RS 12	<<locked>>	69%	16621	88%	**2	100%
ReloadSwiss RS 20	<<locked>>	81%	16433	87%	**6	92%
[Somchem MP200]*	<<locked>>	69%	16679	88%	**6	88%
Vihtavuori N320	<<locked>>	69%	16578	88%	**0	100%
Vihtavuori N330	<<locked>>	73%	16433	87%	**6	97%
Vihtavuori N340	<<locked>>	75%	16476	87%	**6	90%
Winchester AutoComp	<<locked>>	77%	16897	90%	**3	95%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	60%	16070	85%	**6	96%
Accurate Solo 1250	<<locked>>	74%	16056	85%	**7	95%
Alliant BE-86	<<locked>>	71%	15011	80%	**0	97%
[Alliant BULLSEYE]*	<<locked>>	62%	15519	82%	**7	89%
[Alliant Herco]*	<<locked>>	84%	14649	78%	**0	87%
[Alliant UNIQUE]*	<<locked>>	71%	14939	79%	**7	88%
Baschieri & Pellagri 102 Pistol	<<locked>>	87%	14663	78%	**7	99%
Baschieri & Pellagri 103 Pistol	<<locked>>	66%	15243	81%	**3	99%
Hodgdon CFE Pistol	<<locked>>	69%	15403	82%	**3	94%
Hodgdon Universal	<<locked>>	64%	15200	81%	**3	96%
Lovex S020	<<locked>>	68%	15606	83%	**3	91%
Maxam CSB 2	<<locked>>	73%	13735	73%	**0	99%
[Ramshot Silhouette]*	<<locked>>	60%	15026	80%	**3	84%
ReloadSwiss RS 12	<<locked>>	61%	13692	73%	**0	100%
[ReloadSwiss RS 20]*	<<locked>>	73%	13851	73%	**3	88%
[Somchem MP200]*	<<locked>>	67%	15592	83%	**3	86%
Vihtavuori N320	<<locked>>	66%	15345	81%	**7	100%
Vihtavuori N330	<<locked>>	66%	13866	74%	**0	95%
[Vihtavuori N340]*	<<locked>>	73%	15708	83%	**7	89%
Winchester AutoComp	<<locked>>	72%	15229	81%	**3	93%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data