Load data for .45 Colt + .452 | 160gr | LEE Mold 452-160-RF

.45 Colt cartridge drawing
LEE logo

Load Specifications

Bullet Manufacturer:LEE
Bullet Weight:160 gr
Bullet Diameter:0.452"
Bullet Length:<<locked>>
Case Length (l3):1.266"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:41.6 Grains of Water
Primer Size:Large Pistol Magnum (LPM)
Barrel Length:5.5"
Max. allowed Pressure:15,954 psi

Load data in caliber .45 Colt with .452 | 160gr | LEE Mold 452-160-RF bullet and 3 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon TrailBoss and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 5.5"

PowderChargeFRMaxP%V(0)z
Hodgdon TrailBoss<<locked>>96%13,764 psi86%1109 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%13,242 psi83%1129 fps100%
Vihtavuori N32C Tin Star²<<locked>>68%13,880 psi87%1099 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 5.5"

PowderChargeFRMaxP%V(0)z
Hodgdon TrailBoss²6.7 gr60%6,135 psi38%810 fps97.4%
ReloadSwiss RS 14*²6.8 gr60%5,482 psi34%784 fps91.3%
Vihtavuori N32C Tin Star²<<locked>>60%11,095 psi70%1017 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 3 powders for .45 Colt loaded with the .452 | 160gr | LEE Mold 452-160-RF. ReloadSwiss RS 14 delivers the highest muzzle velocity at 1,129 fps; across all powders the maximum-charge window runs from 1,099 fps to 1,129 fps. ReloadSwiss RS 14 gives the best case fill at 100 %, and 2 of the 3 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (110 MPa), the top charges use 83–87 %, leaving at least 13 % headroom. ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon TrailBoss, ReloadSwiss RS 14 rank at the top here: for .45 Colt with the .452 | 160gr | LEE Mold 452-160-RF they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss, ReloadSwiss RS 14, Vihtavuori N32C Tin Star stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data