Load data for .45 Auto Rim + .452 | 255gr | LEE Mold 452-255-RF

.45 Auto Rim cartridge drawing
LEE logo

Load Specifications

Bullet Manufacturer:LEE
Bullet Weight:255 gr
Bullet Diameter:0.452"
Bullet Length:<<locked>>
Case Length (l3):0.898"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:29 Grains of Water
Primer Size:Large Pistol (LP)
Barrel Length:5"
Max. allowed Pressure:17,405 psi

Load data in caliber .45 Auto Rim with .452 | 255gr | LEE Mold 452-255-RF bullet and 13 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Alliant Herco²<<locked>>76%15,708 psi90%863 fps97%
Baschieri & Pellagri 102 Pistol²<<locked>>72%13,982 psi80%791 fps100%
Hodgdon TrailBossᴾ<<locked>>100%11,240 psi65%699 fps100%
Maxam CSB 1²<<locked>>64%15,287 psi88%814 fps99.8%
Maxam CSB 2²<<locked>>64%15,461 psi89%846 fps100%
ReloadSwiss RS 20²<<locked>>64%14,388 psi83%850 fps97.9%
Rottweil P 806*<<locked>>80%14,982 psi86%948 fps88.4%
SNPE Vectan A0²<<locked>>64%15,737 psi90%827 fps96.6%
SNPE Vectan BA7 1/2*²<<locked>>68%14,692 psi84%827 fps87.7%
Vihtavuori 3N37*²<<locked>>64%14,315 psi82%843 fps88.9%
Vihtavuori N32C Tin Star<<locked>>84%15,505 psi89%768 fps100%
Vihtavuori N350*²<<locked>>68%14,040 psi81%837 fps89%
Winchester AutoComp ²<<locked>>64%15,664 psi90%837 fps99.6%

Start Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Alliant Herco*²<<locked>>60%10,008 psi57%719 fps90.4%
Baschieri & Pellagri 102 Pistol²<<locked>>60%9,529 psi55%692 fps99.9%
Hodgdon TrailBoss²<<locked>>60%4,728 psi27%499 fps95.9%
Maxam CSB 1²<<locked>>60%13,779 psi79%784 fps99.4%
Maxam CSB 2²<<locked>>60%13,358 psi77%804 fps100%
ReloadSwiss RS 20²<<locked>>60%12,618 psi73%807 fps96.4%
Rottweil P 806*²<<locked>>76%12,937 psi74%896 fps85.4%
SNPE Vectan A0²<<locked>>60%13,895 psi80%784 fps95%
SNPE Vectan BA7 1/2*²<<locked>>64%12,807 psi74%781 fps85.1%
Vihtavuori 3N37*²<<locked>>60%12,343 psi71%797 fps86.1%
Vihtavuori N32C Tin Star²<<locked>>60%8,325 psi48%627 fps100%
Vihtavuori N350*²<<locked>>64%12,444 psi72%797 fps86.7%
Winchester AutoComp ²<<locked>>60%13,909 psi80%801 fps98.8%

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 13 powders for .45 Auto Rim loaded with the .452 | 255gr | LEE Mold 452-255-RF. Rottweil P 806 delivers the highest muzzle velocity at 948 fps; across all powders the maximum-charge window runs from 699 fps to 948 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 3 of the 13 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (120 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. As outliers, Rottweil P 806, SNPE Vectan BA7 1/2, Vihtavuori 3N37 burn incompletely and react more sensitively to barrel length and temperature. Alliant Herco, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data