top of page

Load data for .45 Auto Rim + .452 | 200gr | H&N RN F

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.45 Auto Rim + .452 | 200gr | H&N RN F

Load Specifications

Bullet:
.452 | 200gr | H&N RN F
Bullet Weight:
200gr | 13.0g
Bullet Diameter:
0.452" | 11.48mm
Bullet Length:
0.610" | 15.5mm
Caliber:
.45 Auto Rim
Case Length (l3):
0.898" | 22.8mm
Cartridge Length (C.O.L.):
1.256" | 31.9mm
Seated Depth:
0.252" | 6.4mm
Shank Seated Depth:
0.252" | 6.4mm
Case Capacity:
29.0 Grains of Water | 1.88 cm³
Primer Size:
Large Pistol (LP)
Max. allowed Pressure:
17405 psi | 1200 bar
LID:
LID_B7531_C727

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 28 loads in caliber .45 Auto Rim with .452 | 200gr | H&N RN F bullet and 14 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate Solo 1250
<<locked>>
64%
15548
89%
**4
99%
Alliant UNIQUE
<<locked>>
64%
14765
85%
**10
94%
Hodgdon TrailBoss
<<locked>>
93%
9021
52%
**4
100%
Maxam CSB 1
<<locked>>
65%
14968
86%
**4
99%
Maxam CSB 2
<<locked>>
64%
14373
83%
**01
100%
ReloadSwiss RS 14
<<locked>>
93%
7876
45%
**4
97%
ReloadSwiss RS 20
<<locked>>
66%
14533
84%
**24
97%
[Rottweil P 806]*
<<locked>>
84%
15432
89%
**42
86%
SNPE Vectan A0
<<locked>>
64%
14968
86%
**1
94%
[SNPE Vectan BA7 1/2]*
<<locked>>
70%
14736
85%
**8
85%
[Vihtavuori 3N37]*
<<locked>>
68%
15185
87%
**33
88%
Vihtavuori N32C Tin Star
<<locked>>
79%
15098
87%
**2
100%
Vihtavuori N340
<<locked>>
63%
14881
85%
**4
95%
[Vihtavuori N350]*
<<locked>>
71%
15156
87%
**30
88%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate Solo 1250
<<locked>>
61%
14185
81%
**8
99%
Alliant UNIQUE
<<locked>>
61%
13663
78%
**1
93%
Hodgdon TrailBoss
<<locked>>
77%
6454
37%
**9
98%
Maxam CSB 1
<<locked>>
62%
13590
78%
**5
98%
Maxam CSB 2
<<locked>>
61%
13024
75%
**5
100%
ReloadSwiss RS 14
<<locked>>
78%
5758
33%
**3
93%
ReloadSwiss RS 20
<<locked>>
61%
12198
70%
**1
94%
[Rottweil P 806]*
<<locked>>
77%
11980
69%
**37
81%
SNPE Vectan A0
<<locked>>
61%
13692
79%
**5
93%
[SNPE Vectan BA7 1/2]*
<<locked>>
63%
11763
68%
**2
81%
[Vihtavuori 3N37]*
<<locked>>
61%
12038
69%
**2
83%
Vihtavuori N32C Tin Star
<<locked>>
61%
8978
52%
**1
100%
Vihtavuori N340
<<locked>>
60%
13648
78%
**8
93%
[Vihtavuori N350]*
<<locked>>
61%
11023
63%
**2
81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page