Load data for .45 Auto (ACP) + .452 | 200gr | LEE Mold 452-200-RF

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.452 \| 200gr \| LEE Mold 452-200-RF
Manufacturer SKU:	452-200-RF
Bullet Weight:	200gr \| 13.0g
Bullet Diameter:	0.452" \| 11.48mm
Bullet Length:	<<locked>>
Caliber:	.45 Auto (ACP) load data
Case Length (l3):	0.898" \| 22.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	25.0 Grains of Water \| 1.62 cm³
Primer Size:	Large Pistol (LP)
Max. allowed Pressure:	18855 psi \| 1300 bar
LID:	LID_B3298_C724
Last updated:	2026-02-03

Load data for 44 loads in caliber .45 Auto (ACP) with .452 | 200gr | LEE Mold 452-200-RF bullet and 22 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate Solo 1250	<<locked>>	67%	16795	89%	**04	100%
Alliant BE-86	<<locked>>	66%	16491	87%	**01	100%
Alliant Herco	<<locked>>	82%	16752	89%	**43	96%
Alliant UNIQUE	<<locked>>	68%	16534	88%	**40	96%
Baschieri & Pellagri 100	<<locked>>	63%	16824	89%	**8	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	81%	16404	87%	**1	100%
Hodgdon CFE Pistol	<<locked>>	63%	16375	87%	**04	99%
Lovex S020	<<locked>>	63%	16723	89%	**27	98%
Maxam CSB 1	<<locked>>	69%	16679	88%	**4	99%
Maxam CSB 2	<<locked>>	69%	16273	86%	**27	100%
Maxam CSB 3	<<locked>>	63%	16462	87%	**8	100%
ReloadSwiss RS 20	<<locked>>	71%	16288	86%	**50	97%
[Rottweil P 806]*	<<locked>>	87%	16549	88%	**58	87%
SNPE Vectan A0	<<locked>>	69%	16650	88%	**4	95%
[SNPE Vectan BA7 1/2]*	<<locked>>	75%	16534	88%	**20	87%
[SNPE Vectan SP 2]*	<<locked>>	70%	16839	89%	**09	82%
Somchem MS200	<<locked>>	64%	16346	87%	**04	96%
[Vihtavuori 3N37]*	<<locked>>	71%	16404	87%	**47	88%
Vihtavuori N32C Tin Star	<<locked>>	84%	16926	90%	**2	100%
Vihtavuori N330	<<locked>>	65%	16215	86%	**27	100%
Vihtavuori N340	<<locked>>	68%	16853	89%	**24	96%
[Vihtavuori N350]*	<<locked>>	74%	16375	87%	**43	89%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate Solo 1250	<<locked>>	61%	13735	73%	**2	98%
Alliant BE-86	<<locked>>	61%	13822	73%	**2	100%
[Alliant Herco]*	<<locked>>	61%	9355	50%	**7	86%
Alliant UNIQUE	<<locked>>	61%	13242	70%	**1	92%
Baschieri & Pellagri 100	<<locked>>	61%	15896	84%	**8	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	64%	9761	52%	**7	99%
Hodgdon CFE Pistol	<<locked>>	61%	14953	79%	**1	99%
Lovex S020	<<locked>>	60%	15258	81%	**1	97%
Maxam CSB 1	<<locked>>	62%	13227	70%	**2	98%
Maxam CSB 2	<<locked>>	61%	12531	66%	**2	100%
Maxam CSB 3	<<locked>>	62%	15693	83%	**5	100%
ReloadSwiss RS 20	<<locked>>	61%	11966	63%	**8	93%
[Rottweil P 806]*	<<locked>>	79%	12212	65%	**27	80%
SNPE Vectan A0	<<locked>>	61%	13402	71%	**5	92%
[SNPE Vectan BA7 1/2]*	<<locked>>	65%	12183	65%	**9	81%
[SNPE Vectan SP 2]*	<<locked>>	68%	15708	83%	**76	81%
Somchem MS200	<<locked>>	62%	14968	79%	**8	95%
[Vihtavuori 3N37]*	<<locked>>	61%	11298	60%	**6	81%
Vihtavuori N32C Tin Star	<<locked>>	69%	11269	60%	**0	100%
Vihtavuori N330	<<locked>>	62%	14634	78%	**8	100%
Vihtavuori N340	<<locked>>	61%	13343	71%	**8	93%
[Vihtavuori N350]*	<<locked>>	62%	10805	57%	**9	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data