
Load Specifications
Load data in caliber .45 ACP with .451 | 230gr | Rim Rock RN bullet and 32 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Baschieri & Pellagri 102 Pistol, Vihtavuori N32C Tin Star and Hodgdon TrailBoss.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 5"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate No. 2*² | <<locked>> | 64% | 15,737 psi | 83% | 794 fps | 89.2% |
| Accurate Solo 1250² | <<locked>> | 72% | 16,476 psi | 87% | 820 fps | 98.5% |
| Alliant BE-86² | <<locked>> | 68% | 15,316 psi | 81% | 807 fps | 99.4% |
| Alliant Green Dot² | <<locked>> | 64% | 16,404 psi | 87% | 794 fps | 100% |
| Alliant Herco* | <<locked>> | 84% | 15,548 psi | 82% | 833 fps | 92.8% |
| Alliant RED DOT² | <<locked>> | 64% | 16,360 psi | 87% | 781 fps | 100% |
| Alliant UNIQUE*² | <<locked>> | 72% | 16,215 psi | 86% | 846 fps | 93.4% |
| Baschieri & Pellagri 100² | <<locked>> | 64% | 15,563 psi | 83% | 774 fps | 99.8% |
| Baschieri & Pellagri 102 Pistol | <<locked>> | 88% | 16,795 psi | 89% | 830 fps | 100% |
| Baschieri & Pellagri 103 Pistol² | <<locked>> | 64% | 16,070 psi | 85% | 820 fps | 100% |
| Hodgdon Clays² | <<locked>> | 64% | 15,650 psi | 83% | 715 fps | 100% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 9,602 psi | 51% | 646 fps | 99.7% |
| Hodgdon Universal² | <<locked>> | 64% | 15,867 psi | 84% | 820 fps | 98.7% |
| Lovex S020² | <<locked>> | 68% | 16,853 psi | 89% | 846 fps | 96.1% |
| Maxam CSB 1² | <<locked>> | 72% | 15,766 psi | 84% | 804 fps | 98.1% |
| Maxam CSB 2² | <<locked>> | 76% | 16,955 psi | 90% | 866 fps | 100% |
| Maxam CSB 3² | <<locked>> | 68% | 16,621 psi | 88% | 810 fps | 100% |
| Maxam CSB 4² | <<locked>> | 64% | 16,665 psi | 88% | 801 fps | 100% |
| ReloadSwiss RS 12² | <<locked>> | 64% | 16,331 psi | 87% | 846 fps | 100% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 8,630 psi | 46% | 636 fps | 96.5% |
| ReloadSwiss RS 20² | <<locked>> | 76% | 15,983 psi | 85% | 860 fps | 95.5% |
| SNPE Vectan A0*² | <<locked>> | 72% | 16,244 psi | 86% | 807 fps | 92.7% |
| SNPE Vectan A1² | <<locked>> | 64% | 16,795 psi | 89% | 810 fps | 99.3% |
| SNPE Vectan BA 9² | <<locked>> | 64% | 16,099 psi | 85% | 797 fps | 96.6% |
| SNPE Vectan BA9 1/2² | <<locked>> | 64% | 15,519 psi | 82% | 804 fps | 97.7% |
| Somchem MP200*² | <<locked>> | 64% | 15,505 psi | 82% | 817 fps | 90.9% |
| Somchem MS200*² | <<locked>> | 68% | 16,230 psi | 86% | 820 fps | 94.2% |
| Vihtavuori N320² | <<locked>> | 64% | 16,172 psi | 86% | 810 fps | 100% |
| Vihtavuori N32C Tin Star | <<locked>> | 96% | 15,998 psi | 85% | 771 fps | 100% |
| Vihtavuori N330² | <<locked>> | 68% | 16,520 psi | 88% | 856 fps | 99.5% |
| Vihtavuori N340*² | <<locked>> | 68% | 15,258 psi | 81% | 810 fps | 92.6% |
| Winchester AutoComp ² | <<locked>> | 72% | 16,143 psi | 86% | 827 fps | 97.5% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 5"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate No. 2*² | <<locked>> | 60% | 13,880 psi | 74% | 755 fps | 87% |
| Accurate Solo 1250*² | <<locked>> | 60% | 11,763 psi | 62% | 719 fps | 94.6% |
| Alliant BE-86² | <<locked>> | 60% | 12,183 psi | 65% | 738 fps | 97.6% |
| Alliant Green Dot² | <<locked>> | 60% | 15,084 psi | 80% | 768 fps | 100% |
| Alliant Herco*² | <<locked>> | 68% | 10,776 psi | 57% | 712 fps | 86.3% |
| Alliant RED DOT² | <<locked>> | 60% | 14,910 psi | 79% | 755 fps | 100% |
| Alliant UNIQUE*² | <<locked>> | 60% | 12,009 psi | 64% | 748 fps | 88.2% |
| Baschieri & Pellagri 100² | <<locked>> | 60% | 13,648 psi | 72% | 738 fps | 99.3% |
| Baschieri & Pellagri 102 Pistol² | 4 gr | 60% | 8,282 psi | 44% | 636 fps | 96.6% |
| Baschieri & Pellagri 103 Pistol² | <<locked>> | 60% | 14,098 psi | 75% | 781 fps | 99.9% |
| Hodgdon Clays² | <<locked>> | 60% | 14,228 psi | 75% | 692 fps | 100% |
| Hodgdon TrailBoss*² | 2.3 gr | 60% | 4,772 psi | 25% | 466 fps | 91.6% |
| Hodgdon Universal² | <<locked>> | 60% | 14,054 psi | 75% | 781 fps | 97.6% |
| Lovex S020*² | <<locked>> | 60% | 13,227 psi | 70% | 771 fps | 92.8% |
| Maxam CSB 1*² | <<locked>> | 60% | 11,371 psi | 60% | 705 fps | 94.2% |
| Maxam CSB 2² | <<locked>> | 60% | 10,573 psi | 56% | 732 fps | 98.4% |
| Maxam CSB 3² | <<locked>> | 60% | 13,431 psi | 71% | 748 fps | 99.2% |
| Maxam CSB 4² | <<locked>> | 60% | 14,562 psi | 77% | 761 fps | 100% |
| ReloadSwiss RS 12² | <<locked>> | 60% | 14,373 psi | 76% | 810 fps | 100% |
| ReloadSwiss RS 14*² | <<locked>> | 64% | 4,815 psi | 26% | 476 fps | 86.4% |
| ReloadSwiss RS 20*² | <<locked>> | 60% | 10,211 psi | 54% | 709 fps | 87.2% |
| SNPE Vectan A0*² | <<locked>> | 60% | 11,589 psi | 61% | 699 fps | 86.8% |
| SNPE Vectan A1² | <<locked>> | 60% | 15,055 psi | 80% | 778 fps | 98.6% |
| SNPE Vectan BA 9² | <<locked>> | 60% | 14,373 psi | 76% | 761 fps | 95.1% |
| SNPE Vectan BA9 1/2² | <<locked>> | 60% | 13,808 psi | 73% | 764 fps | 96.4% |
| Somchem MP200*² | <<locked>> | 60% | 13,938 psi | 74% | 781 fps | 89% |
| Somchem MS200*² | <<locked>> | 60% | 12,937 psi | 69% | 745 fps | 90.6% |
| Vihtavuori N320² | <<locked>> | 60% | 14,069 psi | 75% | 771 fps | 100% |
| Vihtavuori N32C Tin Star² | 3.1 gr | 60% | 7,150 psi | 38% | 581 fps | 99.9% |
| Vihtavuori N330² | <<locked>> | 60% | 12,923 psi | 69% | 781 fps | 97.7% |
| Vihtavuori N340*² | <<locked>> | 60% | 12,082 psi | 64% | 738 fps | 88.7% |
| Winchester AutoComp *² | <<locked>> | 60% | 11,719 psi | 62% | 728 fps | 93.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 32 powders for .45 ACP loaded with the .451 | 230gr | Rim Rock RN. Maxam CSB 2 delivers the highest muzzle velocity at 866 fps; across all powders the maximum-charge window runs from 636 fps to 866 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 5 of the 32 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (130 MPa), the top charges use 46–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Baschieri & Pellagri 102 Pistol, Vihtavuori N32C Tin Star, Hodgdon TrailBoss rank at the top here: for .45 ACP with the .451 | 230gr | Rim Rock RN they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate No. 2, Alliant Herco, Alliant UNIQUE burn incompletely and react more sensitively to barrel length and temperature. Accurate No. 2, Accurate Solo 1250, Alliant BE-86 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.