
Load Specifications
Load data in caliber .45 ACP with .451 | 230gr | LOS RN FMJ bullet and 19 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star, Hodgdon TrailBoss and ReloadSwiss RS 14.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 5"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate Solo 1250² | <<locked>> | 68% | 16,955 psi | 90% | 814 fps | 98.6% |
| Alliant BE-86² | <<locked>> | 64% | 15,708 psi | 83% | 794 fps | 99.4% |
| Alliant Herco* | <<locked>> | 80% | 16,302 psi | 86% | 827 fps | 93.2% |
| Alliant UNIQUE*² | <<locked>> | 68% | 16,665 psi | 88% | 833 fps | 93.5% |
| Baschieri & Pellagri 102 Pistol | <<locked>> | 80% | 15,969 psi | 85% | 797 fps | 100% |
| Hodgdon Clays² | <<locked>> | 64% | 17,056 psi | 90% | 722 fps | 100% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 11,632 psi | 62% | 666 fps | 100% |
| Maxam CSB 1² | <<locked>> | 68% | 15,838 psi | 84% | 784 fps | 98% |
| Maxam CSB 2² | <<locked>> | 68% | 15,635 psi | 83% | 817 fps | 100% |
| Maxam CSB 3² | <<locked>> | 64% | 16,433 psi | 87% | 787 fps | 99.9% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 10,936 psi | 58% | 663 fps | 98.6% |
| ReloadSwiss RS 20² | <<locked>> | 72% | 16,143 psi | 86% | 843 fps | 95.4% |
| SNPE Vectan A0*² | <<locked>> | 68% | 16,201 psi | 86% | 787 fps | 92.4% |
| SNPE Vectan BA9 1/2² | <<locked>> | 64% | 16,882 psi | 90% | 807 fps | 98.3% |
| Somchem MS200*² | <<locked>> | 64% | 16,346 psi | 87% | 801 fps | 94.1% |
| Vihtavuori N32C Tin Star | <<locked>> | 88% | 15,925 psi | 84% | 745 fps | 100% |
| Vihtavuori N330² | <<locked>> | 64% | 15,969 psi | 85% | 827 fps | 99.2% |
| Vihtavuori N340*² | <<locked>> | 68% | 16,607 psi | 88% | 817 fps | 93.7% |
| Winchester AutoComp ² | <<locked>> | 68% | 16,636 psi | 88% | 814 fps | 97.6% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 5"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate Solo 1250² | <<locked>> | 60% | 13,489 psi | 72% | 738 fps | 96.2% |
| Alliant BE-86² | <<locked>> | 60% | 14,127 psi | 75% | 761 fps | 98.7% |
| Alliant Herco*² | <<locked>> | 60% | 10,617 psi | 56% | 676 fps | 85.6% |
| Alliant UNIQUE*² | <<locked>> | 60% | 13,605 psi | 72% | 761 fps | 90% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 60% | 10,138 psi | 54% | 663 fps | 98.5% |
| Hodgdon Clays² | <<locked>> | 60% | 15,577 psi | 83% | 699 fps | 100% |
| Hodgdon TrailBoss² | 2.3 gr | 60% | 6,628 psi | 35% | 499 fps | 96.5% |
| Maxam CSB 1² | <<locked>> | 60% | 13,126 psi | 70% | 725 fps | 95.9% |
| Maxam CSB 2² | <<locked>> | 60% | 12,923 psi | 69% | 758 fps | 99.6% |
| Maxam CSB 3² | <<locked>> | 60% | 15,200 psi | 81% | 764 fps | 99.7% |
| ReloadSwiss RS 14*² | 2.3 gr | 60% | 6,353 psi | 34% | 489 fps | 91.4% |
| ReloadSwiss RS 20*² | <<locked>> | 60% | 11,922 psi | 63% | 735 fps | 90.1% |
| SNPE Vectan A0*² | <<locked>> | 60% | 13,169 psi | 70% | 719 fps | 88.9% |
| SNPE Vectan BA9 1/2² | <<locked>> | 60% | 15,664 psi | 83% | 784 fps | 97.6% |
| Somchem MS200*² | <<locked>> | 60% | 14,721 psi | 78% | 764 fps | 92.4% |
| Vihtavuori N32C Tin Star² | 3.1 gr | 60% | 9,297 psi | 49% | 604 fps | 100% |
| Vihtavuori N330² | <<locked>> | 60% | 14,257 psi | 76% | 791 fps | 98.4% |
| Vihtavuori N340*² | <<locked>> | 60% | 13,460 psi | 71% | 748 fps | 90.3% |
| Winchester AutoComp ² | <<locked>> | 60% | 13,343 psi | 71% | 741 fps | 95% |
Recommended = one of the top powders for this cartridge and bullet combination.
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 19 powders for .45 ACP loaded with the .451 | 230gr | LOS RN FMJ. ReloadSwiss RS 20 delivers the highest muzzle velocity at 843 fps; across all powders the maximum-charge window runs from 663 fps to 843 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 5 of the 19 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (130 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star, Hodgdon TrailBoss, ReloadSwiss RS 14 rank at the top here: for .45 ACP with the .451 | 230gr | LOS RN FMJ they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Alliant Herco, Alliant UNIQUE, SNPE Vectan A0 burn incompletely and react more sensitively to barrel length and temperature. Accurate Solo 1250, Alliant BE-86, Alliant Herco stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.