top of page

Load data for .45-70 Govt. CIP + .458 | 405gr | AlaskaBulletWorks Kodiak FN SPFN

Recommended Powder(s): none

.45-70 Govt. CIP + .458 | 405gr | AlaskaBulletWorks Kodiak FN SPFN

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.458 | 405gr | AlaskaBulletWorks Kodiak FN SPFN
Bullet Weight:
405gr | 26.2g
Bullet Diameter:
0.458" | 11.63mm
Bullet Length:
1.035" | 26.3mm
Caliber:
.45-70 Govt. CIP load data
Case Length (l3):
2.105" | 53.5mm
Cartridge Length (C.O.L.):
2.512" | 63.8mm
Seated Depth:
0.628" | 16.0mm
Shank Seated Depth:
0.628" | 16.0mm
Case Capacity:
79.0 Grains of Water | 5.13 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
31908 psi | 2200 bar
LID:
LID_B327_C749
Last updated:
2025-02-02

Load data for 30 loads in caliber .45-70 Govt. CIP with .458 | 405gr | AlaskaBulletWorks Kodiak FN SPFN bullet and 15 powders such as none. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 14.8 fps

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
85%
31734
99%
**72
100%
[ADI AR 2219]*
<<locked>>
88%
31241
98%
**62
92%
Accurate 2015
<<locked>>
95%
31604
99%
**81
96%
[Accurate 2495]*
<<locked>>
96%
23960
75%
**26
92%
Alliant AR-Comp
<<locked>>
97%
30327
95%
**91
97%
Alliant Reloder-10x
<<locked>>
92%
31894
100%
**95
97%
[Baschieri & Pellagri 106]*
<<locked>>
87%
31546
99%
**03
93%
[Hodgdon H322]*
<<locked>>
93%
31241
98%
**62
92%
[Hodgdon H4198]*
<<locked>>
83%
31357
98%
**80
92%
IMR 4198
<<locked>>
87%
31531
99%
**26
97%
Norma 200
<<locked>>
87%
31560
99%
**81
98%
[Somchem S335]*
<<locked>>
96%
30182
95%
**22
92%
Vihtavuori N120
<<locked>>
87%
31488
99%
**39
100%
Vihtavuori N130
<<locked>>
92%
31488
99%
**39
96%
[Vihtavuori N133]*
<<locked>>
97%
29849
94%
**03
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
28050
88%
**06
99%
[ADI AR 2219]*
<<locked>>
84%
27876
87%
**96
90%
[Accurate 2015]*
<<locked>>
87%
24714
77%
**47
93%
[Accurate 2495]*
<<locked>>
92%
20929
66%
**47
90%
[Alliant AR-Comp]*
<<locked>>
88%
23685
74%
**40
93%
[Alliant Reloder-10x]*
<<locked>>
83%
24584
77%
**50
94%
[Baschieri & Pellagri 106]*
<<locked>>
83%
28456
89%
**44
92%
[Hodgdon H322]*
<<locked>>
89%
27876
87%
**96
90%
[Hodgdon H4198]*
<<locked>>
81%
29544
93%
**44
91%
IMR 4198
<<locked>>
82%
27383
86%
**47
96%
Norma 200
<<locked>>
81%
25817
81%
**70
95%
[Somchem S335]*
<<locked>>
93%
26861
84%
**57
90%
Vihtavuori N120
<<locked>>
81%
26789
84%
**54
99%
[Vihtavuori N130]*
<<locked>>
86%
26353
83%
**40
94%
[Vihtavuori N133]*
<<locked>>
93%
26992
85%
**44
92%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page