Load data for .416 Rigby + .416 | 400gr | Speer TBBC

.416 Rigby cartridge drawing
Speer logo

Load Specifications

Bullet Manufacturer:Speer
Bullet Weight:400 gr
Bullet Diameter:0.416"
Bullet Length:<<locked>>
Case Length (l3):2.902"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:127.5 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:24"
Max. allowed Pressure:47,137 psi
Recommended Twist Rate:1:19.5

Load data in caliber .416 Rigby with .416 | 400gr | Speer TBBC bullet and 45 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-26, Alliant Reloder-16 and Somchem S365.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 3100ᴾ<<locked>>100%42,641 psi90%2290 fps97.8%
Accurate 4350<<locked>>90%42,395 psi90%2297 fps99.1%
ADI AR 2208<<locked>>82%42,134 psi89%2211 fps99.3%
Alliant Reloder- TS 15.5<<locked>>82%41,959 psi89%2234 fps99.9%
Alliant Reloder-16<<locked>>90%41,698 psi88%2303 fps99.2%
Alliant Reloder-17<<locked>>86%41,568 psi88%2326 fps99.9%
Alliant Reloder-23ᴾ<<locked>>100%40,553 psi86%2316 fps99.8%
Alliant Reloder-25ᴾ<<locked>>100%35,911 psi76%2231 fps96.2%
Alliant Reloder-26<<locked>>98%42,279 psi90%2408 fps99%
Bofors RP3<<locked>>82%41,814 psi89%2241 fps99.9%
Bofors RP7<<locked>>86%42,467 psi90%2218 fps96.1%
Hodgdon H380<<locked>>82%42,656 psi90%2247 fps98.7%
Hodgdon H414<<locked>>88%42,177 psi89%2293 fps96.8%
Hodgdon Hybrid 100V<<locked>>92%41,133 psi87%2251 fps99.8%
Hodgdon Superformance<<locked>>88%41,626 psi88%2306 fps96%
Hodgdon TrailBossᴾ<<locked>>100%35,737 psi76%1437 fps100%
IMR 4350<<locked>>90%42,583 psi90%2244 fps96.1%
IMR 4451 Enduron<<locked>>84%41,481 psi88%2201 fps96.3%
IMR 4831<<locked>>90%40,582 psi86%2254 fps98.8%
Lovex S065<<locked>>86%41,147 psi87%2201 fps97.7%
Lovex S070<<locked>>88%41,539 psi88%2228 fps96.7%
Lovex S071ᴾ<<locked>>100%35,505 psi75%2165 fps95.8%
Norma MRP<<locked>>98%42,366 psi90%2372 fps96.6%
Norma URP<<locked>>90%42,250 psi90%2293 fps99%
Ramshot Hunter<<locked>>90%41,031 psi87%2280 fps97.3%
ReloadSwiss RS 14ᴾ<<locked>>100%36,260 psi77%1470 fps100%
ReloadSwiss RS 60<<locked>>84%41,336 psi88%2323 fps100%
ReloadSwiss RS 62<<locked>>90%41,901 psi89%2313 fps98.8%
ReloadSwiss RS 70<<locked>>90%41,655 psi88%2329 fps98.4%
Rottweil R 903<<locked>>84%41,989 psi89%2238 fps99.9%
Rottweil R 907<<locked>>86%42,467 psi90%2218 fps96.1%
Shooters World Long Rifle<<locked>>86%41,147 psi87%2201 fps97.7%
Shooters World SW4350<<locked>>88%41,539 psi88%2228 fps96.7%
SNPE Vectan SP 11<<locked>>82%40,364 psi86%2241 fps99.4%
SNPE Vectan Tubal 5000<<locked>>82%41,684 psi88%2129 fps100%
SNPE Vectan Tubal 7000<<locked>>86%40,495 psi86%2156 fps96.2%
Somchem S355<<locked>>84%42,569 psi90%2238 fps99.8%
Somchem S365<<locked>>92%40,393 psi86%2297 fps100%
Vihtavuori N150<<locked>>84%40,698 psi86%2182 fps100%
Vihtavuori N160<<locked>>88%41,350 psi88%2244 fps98.7%
Vihtavuori N550<<locked>>88%40,654 psi86%2247 fps98.5%
Vihtavuori N555<<locked>>98%41,974 psi89%2336 fps99.4%
Winchester 6.5 StaBALL<<locked>>88%41,031 psi87%2224 fps99.8%
Winchester 760<<locked>>88%42,308 psi90%2297 fps96.8%
Winchester StaBALL HDᴾ<<locked>>100%36,289 psi77%2336 fps99.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>94%34,722 psi74%2152 fps95.6%
Accurate 4350<<locked>>80%30,139 psi64%2060 fps95.8%
ADI AR 2208<<locked>>80%39,653 psi84%2169 fps98.9%
Alliant Reloder- TS 15.5<<locked>>80%39,465 psi84%2192 fps99.7%
Alliant Reloder-1673.1 gr80%30,603 psi65%2070 fps96%
Alliant Reloder-17<<locked>>80%34,011 psi72%2178 fps98.8%
Alliant Reloder-23<<locked>>86%26,614 psi56%2001 fps95.7%
Alliant Reloder-25<<locked>>98%33,765 psi72%2182 fps95.3%
Alliant Reloder-2690.8 gr90%32,126 psi68%2195 fps95.8%
Bofors RP3<<locked>>80%39,160 psi83%2195 fps99.7%
Bofors RP7<<locked>>84%39,987 psi85%2175 fps95.3%
Hodgdon H380<<locked>>80%39,827 psi84%2198 fps98.1%
Hodgdon H414<<locked>>84%36,956 psi78%2195 fps95.2%
Hodgdon Hybrid 100V<<locked>>80%28,181 psi60%1991 fps96.8%
Hodgdon Superformance<<locked>>86%38,798 psi82%2254 fps95%
Hodgdon TrailBoss<<locked>>80%26,687 psi57%1283 fps100%
IMR 4350<<locked>>88%40,118 psi85%2201 fps95.4%
IMR 4451 Enduron<<locked>>82%39,088 psi83%2159 fps95.6%
IMR 4831<<locked>>80%29,385 psi62%2028 fps95.5%
Lovex S065<<locked>>80%34,272 psi73%2073 fps95.7%
Lovex S070<<locked>>84%36,738 psi78%2139 fps95.3%
Lovex S071<<locked>>98%33,286 psi71%2123 fps95%
Norma MRP<<locked>>96%39,610 psi84%2320 fps95.7%
Norma URP<<locked>>80%30,632 psi65%2064 fps95.8%
Ramshot Hunter<<locked>>84%33,910 psi72%2142 fps95%
ReloadSwiss RS 14<<locked>>80%27,093 psi57%1312 fps100%
ReloadSwiss RS 60<<locked>>80%36,230 psi77%2231 fps100%
ReloadSwiss RS 62<<locked>>80%29,907 psi63%2073 fps95.2%
ReloadSwiss RS 70<<locked>>82%31,995 psi68%2123 fps95%
Rottweil R 903<<locked>>80%36,898 psi78%2149 fps99.3%
Rottweil R 907<<locked>>84%39,987 psi85%2175 fps95.3%
Shooters World Long Rifle<<locked>>80%34,272 psi73%2073 fps95.7%
Shooters World SW4350<<locked>>84%36,738 psi78%2139 fps95.3%
SNPE Vectan SP 11<<locked>>80%37,826 psi80%2195 fps99%
SNPE Vectan Tubal 5000<<locked>>80%39,175 psi83%2090 fps100%
SNPE Vectan Tubal 7000<<locked>>84%37,942 psi80%2110 fps95.4%
Somchem S355<<locked>>80%37,681 psi80%2152 fps99.3%
Somchem S36574.7 gr80%27,441 psi58%2024 fps98%
Vihtavuori N150<<locked>>80%35,810 psi76%2096 fps99.7%
Vihtavuori N160<<locked>>80%31,879 psi68%2064 fps96.2%
Vihtavuori N550<<locked>>80%31,343 psi66%2064 fps95.8%
Vihtavuori N555<<locked>>86%28,529 psi61%2064 fps95.9%
Winchester 6.5 StaBALL<<locked>>80%31,546 psi67%2044 fps98.1%
Winchester 760<<locked>>84%37,072 psi79%2198 fps95.2%
Winchester StaBALL HD<<locked>>90%26,469 psi56%2067 fps96.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 45 powders for .416 Rigby loaded with the .416 | 400gr | Speer TBBC. Alliant Reloder-26 delivers the highest muzzle velocity at 2,408 fps; across all powders the maximum-charge window runs from 1,437 fps to 2,408 fps. Accurate 3100 gives the best case fill at 100 %, and 45 of the 45 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (325 MPa), the top charges use 75–90 %, leaving at least 10 % headroom. The 400.0 gr projectile in 0.416" calls for a 1:19.5 twist; slower twists will usually not stabilise this weight. Accurate 3100, Alliant Reloder-23, Alliant Reloder-25 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-26, Alliant Reloder-16, Somchem S365 rank at the top here: for .416 Rigby with the .416 | 400gr | Speer TBBC they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data