Load data for .405 Win. + .411 | 325gr | CutEdge DGBR-HP

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.411 \| 325gr \| CutEdge DGBR-HP
Manufacturer SKU:	DGBR-HP Q06
Bullet Weight:	325gr \| 21.1g
Bullet Diameter:	0.411" \| 10.44mm
Bullet Length:	1.359" \| 34.5mm
Caliber:	.405 Win. load data
Case Length (l3):	2.580" \| 65.5mm
Cartridge Length (C.O.L.):	3.127" \| 79.4mm
Seated Depth:	0.812" \| 20.6mm
Shank Seated Depth:	0.812" \| 20.6mm
Case Capacity:	78.0 Grains of Water \| 5.06 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	45977 psi \| 3170 bar
LID:	LID_B8582_C663
Last updated:	2025-01-01

Load data for 78 loads in caliber .405 Win. with .411 | 325gr | CutEdge DGBR-HP bullet and 39 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207 👍	<<locked>>	90%	41321	90%	**37	100%
ADI AR 2219	<<locked>>	93%	40828	89%	**67	97%
Accurate 2015	<<locked>>	97%	37115	81%	**05	98%
[Accurate 2230]*	<<locked>>	97%	40625	88%	**31	91%
[Accurate 2460]*	<<locked>>	96%	38624	84%	**31	93%
Accurate 2495	<<locked>>	97%	27441	60%	**26	95%
[Accurate 2520]*	<<locked>>	97%	31256	68%	**49	91%
Alliant AR-Comp	<<locked>>	97%	33025	72%	**85	99%
Alliant Reloder-10x 👍	<<locked>>	96%	40988	89%	**67	99%
Alliant Reloder-7 👍	<<locked>>	89%	41205	90%	**11	100%
Baschieri & Pellagri 106	<<locked>>	93%	41379	90%	**95	98%
[Hodgdon Benchmark]*	<<locked>>	97%	39668	86%	**88	93%
[Hodgdon CFE BLK]*	<<locked>>	88%	40625	88%	**62	92%
Hodgdon H322	<<locked>>	97%	38101	83%	**24	96%
Hodgdon H335	<<locked>>	94%	40567	88%	**70	96%
Hodgdon H4198	<<locked>>	89%	41234	90%	**75	97%
[IMR 3031]*	<<locked>>	97%	28631	62%	**90	93%
IMR 4198 👍	<<locked>>	94%	41176	90%	**14	100%
[Lovex D073.4]*	<<locked>>	96%	40524	88%	**44	94%
[Lovex D073.5]*	<<locked>>	96%	38159	83%	**24	93%
Lovex S053	<<locked>>	83%	40654	88%	**39	100%
Norma 200 👍	<<locked>>	93%	41089	89%	**60	100%
[Norma 202]*	<<locked>>	96%	31589	69%	**26	93%
ReloadSwiss RS 36	<<locked>>	84%	41176	90%	**95	100%
ReloadSwiss RS 40	<<locked>>	97%	40770	89%	**51	95%
[Rottweil R 901]*	<<locked>>	96%	34534	75%	**52	94%
SNPE Vectan BA6 1/2	<<locked>>	86%	40611	88%	**24	100%
SNPE Vectan SP 10	<<locked>>	93%	41089	89%	**77	96%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	35143	76%	**06	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	28442	62%	**88	92%
[Shooters World Tactical Rifle]*	<<locked>>	94%	40944	89%	**08	92%
[Somchem S321]*	<<locked>>	96%	37463	81%	**21	92%
Somchem S335	<<locked>>	97%	33605	73%	**13	95%
Vihtavuori N120	<<locked>>	92%	40640	88%	**95	100%
Vihtavuori N130	<<locked>>	97%	39160	85%	**88	99%
Vihtavuori N133	<<locked>>	97%	32372	70%	**83	96%
[Vihtavuori N140]*	<<locked>>	96%	30037	65%	**67	92%
[Vihtavuori N530]*	<<locked>>	97%	37710	82%	**08	92%
[Winchester 748]*	<<locked>>	96%	37289	81%	**24	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	30937	67%	**77	100%
[ADI AR 2219]*	<<locked>>	81%	27615	60%	**21	92%
[Accurate 2015]*	<<locked>>	81%	22408	49%	**06	93%
[Accurate 2230]*	<<locked>>	94%	36985	80%	**78	90%
[Accurate 2460]*	<<locked>>	90%	30371	66%	**90	90%
[Accurate 2495]*	<<locked>>	87%	19377	42%	**22	90%
[Accurate 2520]*	<<locked>>	94%	28703	62%	**93	90%
[Alliant AR-Comp]*	<<locked>>	81%	20537	45%	**77	93%
Alliant Reloder-10x	<<locked>>	81%	25353	55%	**85	95%
Alliant Reloder-7	<<locked>>	81%	32474	71%	**70	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	28631	62%	**78	93%
[Hodgdon Benchmark]*	<<locked>>	90%	32460	71%	**64	90%
[Hodgdon CFE BLK]*	<<locked>>	84%	35317	77%	**73	90%
[Hodgdon H322]*	<<locked>>	83%	25150	55%	**62	90%
[Hodgdon H335]*	<<locked>>	82%	27659	60%	**24	90%
[Hodgdon H4198]*	<<locked>>	81%	32024	70%	**18	94%
[IMR 3031]*	<<locked>>	90%	23757	52%	**68	90%
IMR 4198	<<locked>>	81%	28645	62%	**95	97%
[Lovex D073.4]*	<<locked>>	89%	31009	67%	**86	90%
[Lovex D073.5]*	<<locked>>	90%	30777	67%	**96	90%
Lovex S053	<<locked>>	81%	38087	83%	**00	100%
Norma 200	<<locked>>	81%	28442	62%	**44	97%
[Norma 202]*	<<locked>>	91%	26643	58%	**18	90%
ReloadSwiss RS 36	<<locked>>	81%	37695	82%	**46	100%
[ReloadSwiss RS 40]*	<<locked>>	87%	29936	65%	**60	90%
[Rottweil R 901]*	<<locked>>	87%	26484	58%	**91	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	35708	78%	**59	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	27398	60%	**21	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	27035	59%	**55	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	25208	55%	**16	90%
[Shooters World Tactical Rifle]*	<<locked>>	91%	36883	80%	**49	90%
[Somchem S321]*	<<locked>>	93%	33997	74%	**59	90%
[Somchem S335]*	<<locked>>	86%	24062	52%	**16	90%
Vihtavuori N120	<<locked>>	81%	29240	64%	**14	100%
[Vihtavuori N130]*	<<locked>>	81%	24410	53%	**16	94%
[Vihtavuori N133]*	<<locked>>	83%	21872	48%	**44	91%
[Vihtavuori N140]*	<<locked>>	92%	26643	58%	**91	90%
[Vihtavuori N530]*	<<locked>>	93%	34069	74%	**42	90%
[Winchester 748]*	<<locked>>	93%	33649	73%	**59	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data