top of page

Load data for .400/350 Rigby N.E. + .357 | 110gr | Speer HPSB GD

Recommended Powder(s): ADI AR 2207, Vihtavuori N120

.400/350 Rigby N.E. + .357 | 110gr | Speer HPSB GD

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.357 | 110gr | Speer HPSB GD
Manufacturer SKU:
4009
Bullet Weight:
110gr | 7.1g
Bullet Diameter:
0.357" | 9.07mm
Bullet Length:
0.520" | 13.2mm
Caliber:
.400/350 Rigby N.E. load data
Case Length (l3):
2.750" | 69.8mm
Cartridge Length (C.O.L.):
3.148" | 80.0mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
78.0 Grains of Water | 5.06 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B6213_C654
Last updated:
2025-01-01

Load data for 24 loads in caliber .400/350 Rigby N.E. with .357 | 110gr | Speer HPSB GD bullet and 12 powders such as ADI AR 2207, Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
87%
36289
89%
**71
99%
[Accurate 2015]*
<<locked>>
96%
36347
90%
**58
94%
Alliant AR-Comp
<<locked>>
97%
32938
81%
**15
95%
Alliant Reloder-10x
<<locked>>
93%
36230
89%
**84
95%
Alliant Reloder-7
<<locked>>
85%
36201
89%
**09
96%
[Baschieri & Pellagri 106]*
<<locked>>
88%
36274
89%
**40
92%
Hodgdon TrailBoss
<<locked>>
97%
27876
69%
**98
100%
IMR 4198
<<locked>>
90%
36289
89%
**22
96%
Norma 200
<<locked>>
89%
36042
89%
**64
96%
ReloadSwiss RS 14
<<locked>>
97%
27267
67%
**41
100%
Vihtavuori N120 👍
<<locked>>
89%
36085
89%
**25
99%
Vihtavuori N130
<<locked>>
94%
36230
89%
**05
95%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
29617
73%
**87
97%
[Accurate 2015]*
<<locked>>
89%
28485
70%
**22
90%
[Alliant AR-Comp]*
<<locked>>
90%
26020
64%
**63
90%
[Alliant Reloder-10x]*
<<locked>>
84%
26368
65%
**66
90%
[Alliant Reloder-7]*
<<locked>>
81%
31401
77%
**74
94%
[Baschieri & Pellagri 106]*
<<locked>>
85%
32372
80%
**31
90%
Hodgdon TrailBoss
<<locked>>
81%
21335
53%
**11
100%
[IMR 4198]*
<<locked>>
81%
27311
67%
**40
92%
[Norma 200]*
<<locked>>
81%
26716
66%
**76
92%
ReloadSwiss RS 14
<<locked>>
81%
20885
51%
**54
100%
Vihtavuori N120
<<locked>>
81%
27789
68%
**89
97%
[Vihtavuori N130]*
<<locked>>
86%
27267
67%
**33
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page