top of page

Load data for .400/350 Rigby N.E. + .357 | 110gr | Sierra JHC Blitz

Recommended Powder(s): ADI AR 2207, Vihtavuori N120

.400/350 Rigby N.E. + .357 | 110gr | Sierra JHC Blitz

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.357 | 110gr | Sierra JHC Blitz
Manufacturer SKU:
8300
Bullet Weight:
110gr | 7.1g
Bullet Diameter:
0.357" | 9.07mm
Bullet Length:
0.520" | 13.2mm
Caliber:
.400/350 Rigby N.E. load data
Case Length (l3):
2.750" | 69.8mm
Cartridge Length (C.O.L.):
3.148" | 80.0mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
78.0 Grains of Water | 5.06 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B5943_C654
Last updated:
2025-01-01

Load data for 26 loads in caliber .400/350 Rigby N.E. with .357 | 110gr | Sierra JHC Blitz bullet and 13 powders such as ADI AR 2207, Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
86%
36361
90%
**71
99%
[Accurate 2015]*
<<locked>>
96%
36201
89%
**41
94%
Alliant AR-Comp
<<locked>>
97%
33649
83%
**41
95%
Alliant Reloder-10x
<<locked>>
92%
36477
90%
**78
95%
Alliant Reloder-7
<<locked>>
85%
36521
90%
**19
96%
[Baschieri & Pellagri 106]*
<<locked>>
88%
36521
90%
**36
92%
Hodgdon TrailBoss
<<locked>>
97%
28210
69%
**01
100%
IMR 4198
<<locked>>
89%
36230
89%
**19
96%
Norma 200
<<locked>>
89%
36535
90%
**68
96%
ReloadSwiss RS 14
<<locked>>
97%
27688
68%
**47
100%
Vihtavuori N120 👍
<<locked>>
88%
36274
89%
**28
99%
Vihtavuori N130
<<locked>>
94%
36434
90%
**02
95%
[Vihtavuori N133]*
<<locked>>
97%
32518
80%
**77
91%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
30327
75%
**00
97%
[Accurate 2015]*
<<locked>>
89%
28340
70%
**12
90%
[Alliant AR-Comp]*
<<locked>>
89%
26310
65%
**76
90%
[Alliant Reloder-10x]*
<<locked>>
83%
26803
66%
**72
90%
[Alliant Reloder-7]*
<<locked>>
81%
32155
79%
**87
94%
[Baschieri & Pellagri 106]*
<<locked>>
85%
32503
80%
**25
90%
Hodgdon TrailBoss
<<locked>>
81%
21698
53%
**14
100%
[IMR 4198]*
<<locked>>
81%
27818
69%
**49
92%
[Norma 200]*
<<locked>>
81%
27876
69%
**12
92%
ReloadSwiss RS 14
<<locked>>
81%
21350
53%
**60
100%
Vihtavuori N120
<<locked>>
81%
28442
70%
**02
97%
[Vihtavuori N130]*
<<locked>>
85%
27528
68%
**33
90%
[Vihtavuori N133]*
<<locked>>
94%
30066
74%
**05
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page