top of page

Load data for .400/350 Rigby N.E. + .356 | 100gr | Berry's Flat Base Round Nose

Recommended Powder(s): Vihtavuori N120

.400/350 Rigby N.E. + .356 | 100gr | Berry's Flat Base Round Nose

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.356 | 100gr | Berry's Flat Base Round Nose
Manufacturer SKU:
bp-380-356-100gr-fbrn
Bullet Weight:
100gr | 6.5g
Bullet Diameter:
0.356" | 9.04mm
Bullet Length:
0.425" | 10.8mm
Caliber:
.400/350 Rigby N.E. load data
Case Length (l3):
2.750" | 69.8mm
Cartridge Length (C.O.L.):
3.150" | 80.0mm
Seated Depth:
0.025" | 0.6mm
Shank Seated Depth:
0.025" | 0.6mm
Case Capacity:
78.0 Grains of Water | 5.06 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B10778_C654
Last updated:
2025-02-02

Load data for 24 loads in caliber .400/350 Rigby N.E. with .356 | 100gr | Berry's Flat Base Round Nose bullet and 12 powders such as Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
87%
36361
90%
**12
98%
[Accurate 2015]*
<<locked>>
97%
36201
89%
**73
93%
[Alliant AR-Comp]*
<<locked>>
97%
32184
79%
**07
93%
[Alliant Reloder-10x]*
<<locked>>
93%
36216
89%
**09
94%
Alliant Reloder-7
<<locked>>
86%
36390
90%
**50
95%
Hodgdon TrailBoss
<<locked>>
96%
27615
68%
**06
100%
IMR 4198
<<locked>>
91%
36477
90%
**60
95%
Norma 200
<<locked>>
90%
36187
89%
**99
95%
ReloadSwiss RS 14
<<locked>>
96%
26948
66%
**56
100%
SNPE Vectan BA6 1/2
<<locked>>
84%
36245
89%
**86
100%
Vihtavuori N120 👍
<<locked>>
90%
36376
90%
**73
99%
[Vihtavuori N130]*
<<locked>>
95%
36216
89%
**30
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
29022
71%
**79
95%
[Accurate 2015]*
<<locked>>
91%
29994
74%
**89
90%
[Alliant AR-Comp]*
<<locked>>
93%
28166
69%
**56
90%
[Alliant Reloder-10x]*
<<locked>>
86%
28587
70%
**56
90%
[Alliant Reloder-7]*
<<locked>>
81%
30777
76%
**76
92%
Hodgdon TrailBoss
<<locked>>
81%
21335
53%
**19
100%
[IMR 4198]*
<<locked>>
82%
27441
68%
**54
90%
[Norma 200]*
<<locked>>
81%
26440
65%
**81
90%
ReloadSwiss RS 14
<<locked>>
81%
20914
51%
**65
100%
SNPE Vectan BA6 1/2
<<locked>>
81%
33562
83%
**27
100%
Vihtavuori N120
<<locked>>
81%
27354
67%
**87
96%
[Vihtavuori N130]*
<<locked>>
88%
28819
71%
**00
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page