top of page

Load data for .380 ACP (9mm kurz) + .356 | 125gr | H&N RN F

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.380 ACP (9mm kurz) + .356 | 125gr | H&N RN F

Load Specifications

Bullet:
.356 | 125gr | H&N RN F
Bullet Weight:
125gr | 8.1g
Bullet Diameter:
0.356" | 9.04mm
Bullet Length:
0.575" | 14.6mm
Caliber:
.380 ACP (9mm kurz)
Case Length (l3):
0.681" | 17.3mm
Cartridge Length (C.O.L.):
0.969" | 24.6mm
Seated Depth:
0.287" | 7.3mm
Shank Seated Depth:
0.287" | 7.3mm
Case Capacity:
11.5 Grains of Water | 0.75 cm³
Primer Size:
Small Pistol (SP)
Max. allowed Pressure:
19580 psi | 1350 bar
LID:
LID_B7451_C608

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 60 loads in caliber .380 ACP (9mm kurz) with .356 | 125gr | H&N RN F bullet and 30 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 70N
<<locked>>
82%
15461
79%
**7
93%
ADI APS 450
<<locked>>
75%
16041
82%
**9
100%
ADI AS 30
<<locked>>
83%
14939
76%
**1
100%
ADI AS 50N
<<locked>>
87%
17245
88%
**7
98%
Accurate Solo 1000
<<locked>>
84%
17216
88%
**8
98%
Accurate Solo 1250
<<locked>>
91%
14127
72%
**8
90%
[Alliant BULLSEYE]*
<<locked>>
82%
16636
85%
**7
86%
[Alliant UNIQUE]*
<<locked>>
97%
14591
75%
**1
83%
Baschieri & Pellagri 100
<<locked>>
91%
17013
87%
**4
97%
Hodgdon HP38
<<locked>>
65%
15838
81%
**1
94%
Hodgdon Universal
<<locked>>
91%
15461
79%
**7
93%
Lovex S011
<<locked>>
75%
17071
87%
**4
94%
[Lovex S020]*
<<locked>>
90%
15113
77%
**4
86%
[Maxam CSB 1]*
<<locked>>
92%
13140
67%
**8
89%
Maxam CSB 2
<<locked>>
96%
11705
60%
**1
95%
Maxam CSB 3
<<locked>>
95%
17231
88%
**1
97%
Maxam CSB 4 👍
<<locked>>
90%
17085
87%
**4
99%
Maxam CSB 5
<<locked>>
79%
14982
77%
**8
100%
Ramshot Zip
<<locked>>
69%
17506
89%
**1
94%
ReloadSwiss RS 12 👍
<<locked>>
93%
15229
78%
**3
100%
Rottweil P 801 👍
<<locked>>
83%
15389
79%
**3
100%
[SNPE Vectan BA 9]*
<<locked>>
84%
15737
80%
**8
88%
SNPE Vectan BA10
<<locked>>
70%
16027
82%
**9
100%
SNPE Vectan BA9 1/2
<<locked>>
90%
15824
81%
**4
91%
[Somchem MS200]*
<<locked>>
95%
17172
88%
**1
86%
Vihtavuori N310
<<locked>>
74%
17318
88%
**4
100%
Vihtavuori N320 👍
<<locked>>
93%
17013
87%
**0
99%
Vihtavuori N330
<<locked>>
96%
16085
82%
**7
94%
[Vihtavuori N340]*
<<locked>>
94%
14997
77%
**1
83%
Winchester 231
<<locked>>
77%
17506
89%
**1
94%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AP 70N]*
<<locked>>
66%
9355
48%
**9
85%
ADI APS 450
<<locked>>
67%
13227
68%
**3
100%
ADI AS 30
<<locked>>
75%
12299
63%
**2
99%
ADI AS 50N
<<locked>>
74%
12053
62%
**2
94%
Accurate Solo 1000
<<locked>>
70%
11995
61%
**9
95%
[Accurate Solo 1250]*
<<locked>>
78%
10167
52%
**6
83%
[Alliant BULLSEYE]*
<<locked>>
76%
14185
72%
**1
83%
[Alliant UNIQUE]*
<<locked>>
91%
12517
64%
**5
80%
Baschieri & Pellagri 100
<<locked>>
78%
11879
61%
**6
92%
Hodgdon HP38
<<locked>>
61%
13489
69%
**5
92%
[Hodgdon Universal]*
<<locked>>
73%
9355
48%
**9
85%
[Lovex S011]*
<<locked>>
63%
12038
61%
**9
89%
[Lovex S020]*
<<locked>>
84%
12807
65%
**8
83%
[Maxam CSB 1]*
<<locked>>
86%
11226
57%
**6
86%
[Maxam CSB 2]*
<<locked>>
83%
8427
43%
**9
89%
Maxam CSB 3
<<locked>>
74%
10138
52%
**9
90%
Maxam CSB 4
<<locked>>
76%
11908
61%
**9
95%
Maxam CSB 5
<<locked>>
72%
12256
63%
**2
100%
Ramshot Zip
<<locked>>
60%
12705
65%
**5
90%
ReloadSwiss RS 12
<<locked>>
70%
7571
39%
**3
91%
Rottweil P 801
<<locked>>
67%
9007
46%
**2
97%
[SNPE Vectan BA 9]*
<<locked>>
73%
11632
59%
**6
83%
SNPE Vectan BA10
<<locked>>
63%
13213
67%
**3
100%
[SNPE Vectan BA9 1/2]*
<<locked>>
78%
11618
59%
**6
86%
[Somchem MS200]*
<<locked>>
84%
12778
65%
**5
81%
Vihtavuori N310
<<locked>>
60%
11124
57%
**9
100%
Vihtavuori N320
<<locked>>
73%
9848
50%
**6
93%
[Vihtavuori N330]*
<<locked>>
78%
9906
51%
**6
84%
[Vihtavuori N340]*
<<locked>>
88%
12850
66%
**5
80%
[Winchester 231]*
<<locked>>
62%
10834
55%
**9
87%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page