Load data for .380 ACP (9mm kurz) + .355 | 95gr | Speer TMJ

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 95gr \| Speer TMJ
Manufacturer SKU:	4001
Bullet Weight:	95gr \| 6.2g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.440" \| 11.2mm
Caliber:	.380 ACP (9mm kurz) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.152" \| 3.9mm
Shank Seated Depth:	0.152" \| 3.9mm
Case Capacity:	11.5 Grains of Water \| 0.75 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B6199_C608
Last updated:	2026-01-23

Load data for 80 loads in caliber .380 ACP (9mm kurz) with .355 | 95gr | Speer TMJ bullet and 40 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	72%	16955	87%	**02	95%
ADI APS 350	<<locked>>	64%	16476	84%	**8	100%
ADI APS 450	<<locked>>	69%	17535	90%	**1	100%
ADI AS 30	<<locked>>	76%	17535	90%	**33	100%
ADI AS 50N	<<locked>>	75%	17477	89%	**63	99%
[Accurate No. 2]*	<<locked>>	77%	17361	89%	**40	83%
Accurate Solo 1000	<<locked>>	72%	16795	86%	**24	99%
Accurate Solo 1250	<<locked>>	85%	17129	87%	**79	94%
[Alliant BULLSEYE]*	<<locked>>	72%	17013	87%	**89	88%
[Alliant Sport Pistol]*	<<locked>>	68%	17158	88%	**86	87%
[Alliant UNIQUE]*	<<locked>>	88%	17013	87%	**15	88%
Baschieri & Pellagri 100	<<locked>>	80%	17535	90%	**56	98%
Baschieri & Pellagri 102 Pistol	<<locked>>	96%	14243	73%	**30	98%
Baschieri & Pellagri 103 Pistol	<<locked>>	77%	16810	86%	**89	99%
Hodgdon Clays	<<locked>>	64%	16752	86%	**5	100%
Hodgdon Universal	<<locked>>	79%	16955	87%	**02	95%
Hodgdon CFE Pistol	<<locked>>	83%	17361	89%	**02	94%
Lovex S011	<<locked>>	66%	17318	88%	**40	96%
Lovex S020	<<locked>>	81%	17463	89%	**02	91%
Maxam CSB 1	<<locked>>	88%	16955	87%	**70	94%
Maxam CSB 2 👍	<<locked>>	93%	16911	86%	**48	99%
Maxam CSB 3	<<locked>>	81%	17085	87%	**70	98%
Maxam CSB 4	<<locked>>	77%	17085	87%	**60	99%
Maxam CSB 5	<<locked>>	72%	17405	89%	**43	100%
[Ramshot Silhouette]*	<<locked>>	71%	17114	87%	**93	84%
ReloadSwiss RS 12 👍	<<locked>>	81%	17564	90%	**58	100%
[ReloadSwiss RS 20]*	<<locked>>	91%	16853	86%	**12	89%
Rottweil P 801	<<locked>>	71%	16723	85%	**02	100%
[SNPE Vectan A0]*	<<locked>>	86%	17260	88%	**56	87%
SNPE Vectan BA 9	<<locked>>	77%	17231	88%	**50	92%
SNPE Vectan BA10	<<locked>>	64%	17521	89%	**1	100%
SNPE Vectan BA9 1/2	<<locked>>	81%	17347	89%	**86	94%
[Somchem MP200]*	<<locked>>	80%	17303	88%	**93	86%
[Somchem MS200]*	<<locked>>	81%	16781	86%	**66	88%
Vihtavuori N310	<<locked>>	62%	17085	87%	**17	100%
Vihtavuori N320	<<locked>>	80%	17202	88%	**96	100%
Vihtavuori N32C Tin Star	<<locked>>	96%	12604	64%	**1	100%
Vihtavuori N330	<<locked>>	85%	17260	88%	**29	96%
[Vihtavuori N340]*	<<locked>>	85%	16926	86%	**83	87%
Winchester 231	<<locked>>	66%	17376	89%	**73	96%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	61%	12285	63%	**1	90%
[ADI APS 350]²	<<locked>>	59%	14707	75%	**9	100%
ADI APS 450	<<locked>>	62%	14939	76%	**8	100%
ADI AS 30	<<locked>>	63%	12560	64%	**9	100%
ADI AS 50N	<<locked>>	60%	11705	60%	**9	95%
[Accurate No. 2]*	<<locked>>	72%	15098	77%	**4	80%
Accurate Solo 1000	<<locked>>	63%	13024	67%	**5	97%
[Accurate Solo 1250]*	<<locked>>	62%	9065	46%	**3	83%
[Alliant BULLSEYE]*	<<locked>>	62%	12836	66%	**8	83%
[Alliant Sport Pistol]*	<<locked>>	62%	14228	73%	**07	83%
[Alliant UNIQUE]*	<<locked>>	74%	11995	61%	**8	81%
Baschieri & Pellagri 100	<<locked>>	62%	10675	54%	**9	92%
Baschieri & Pellagri 102 Pistol	<<locked>>	74%	8209	42%	**0	90%
Baschieri & Pellagri 103 Pistol	<<locked>>	60%	9529	49%	**9	92%
[Hodgdon Clays]²	<<locked>>	59%	14736	75%	**2	100%
[Hodgdon Universal]*	<<locked>>	61%	10196	52%	**6	87%
[Hodgdon CFE Pistol]*²	<<locked>>	59%	8992	46%	**3	82%
Lovex S011	<<locked>>	61%	14852	76%	**4	94%
[Lovex S020]*	<<locked>>	64%	10196	52%	**9	80%
[Maxam CSB 1]*	<<locked>>	64%	9137	47%	**3	83%
[Maxam CSB 2]*	<<locked>>	62%	7397	38%	**0	87%
Maxam CSB 3	<<locked>>	60%	9761	50%	**6	90%
Maxam CSB 4	<<locked>>	61%	11211	57%	**2	96%
Maxam CSB 5	<<locked>>	60%	12140	62%	**2	100%
[Ramshot Silhouette]*	<<locked>>	65%	14011	72%	**07	80%
ReloadSwiss RS 12	<<locked>>	62%	9500	49%	**5	95%
[ReloadSwiss RS 20]*	<<locked>>	76%	11632	59%	**5	81%
Rottweil P 801	<<locked>>	62%	12488	64%	**7	100%
[SNPE Vectan A0]*	<<locked>>	73%	12459	64%	**9	80%
[SNPE Vectan BA 9]*²	<<locked>>	59%	10530	54%	**0	83%
SNPE Vectan BA10	<<locked>>	62%	16694	85%	**5	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	60%	9848	50%	**6	84%
[Somchem MP200]*	<<locked>>	71%	13489	69%	**1	81%
[Somchem MS200]*	<<locked>>	66%	11342	58%	**6	80%
Vihtavuori N310	<<locked>>	60%	16056	82%	**7	100%
[Vihtavuori N320]²	<<locked>>	59%	9326	48%	**9	93%
Vihtavuori N32C Tin Star	<<locked>>	78%	8369	43%	**3	99%
[Vihtavuori N330]*	<<locked>>	60%	8412	43%	**0	83%
[Vihtavuori N340]*	<<locked>>	72%	11879	61%	**2	81%
Winchester 231	<<locked>>	60%	14489	74%	**01	93%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data