Load data for .380 ACP (9mm kurz) + .355 | 90gr | Speer Hollow Point Gold Dot

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 90gr \| Speer Hollow Point Gold Dot
Manufacturer SKU:	3992
Bullet Weight:	90gr \| 5.8g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.435" \| 11.0mm
Caliber:	.380 ACP (9mm kurz) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.147" \| 3.7mm
Shank Seated Depth:	0.147" \| 3.7mm
Case Capacity:	11.5 Grains of Water \| 0.75 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B6198_C608
Last updated:	2026-01-20

Load data for 76 loads in caliber .380 ACP (9mm kurz) with .355 | 90gr | Speer Hollow Point Gold Dot bullet and 38 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	74%	17347	89%	**52	95%
ADI APS 350	<<locked>>	65%	16752	86%	**8	100%
ADI APS 450	<<locked>>	68%	16636	85%	**01	100%
ADI AS 30	<<locked>>	77%	17260	88%	**70	100%
ADI AS 50N	<<locked>>	75%	17303	88%	**96	99%
Accurate Solo 1000	<<locked>>	75%	17521	89%	**76	99%
Accurate Solo 1250	<<locked>>	86%	16897	86%	**06	93%
[Alliant BULLSEYE]*	<<locked>>	74%	17390	89%	**32	88%
[Alliant Sport Pistol]*	<<locked>>	69%	17477	89%	**29	86%
[Alliant UNIQUE]*	<<locked>>	90%	17347	89%	**61	87%
Baschieri & Pellagri 100	<<locked>>	80%	17419	89%	**86	98%
Baschieri & Pellagri 102 Pistol	<<locked>>	96%	13735	70%	**53	97%
Baschieri & Pellagri 103 Pistol	<<locked>>	80%	17550	90%	**42	99%
Hodgdon Clays	<<locked>>	65%	16839	86%	**1	100%
Hodgdon Universal	<<locked>>	81%	17347	89%	**52	95%
Hodgdon CFE Pistol	<<locked>>	83%	17245	88%	**29	93%
Lovex S011	<<locked>>	66%	17231	88%	**76	95%
[Lovex S020]*	<<locked>>	81%	17042	87%	**32	89%
Maxam CSB 1	<<locked>>	90%	17390	89%	**15	94%
Maxam CSB 2 👍	<<locked>>	95%	17202	88%	**94	99%
Maxam CSB 3	<<locked>>	82%	16766	86%	**96	97%
Maxam CSB 4	<<locked>>	78%	16839	86%	**89	99%
Maxam CSB 5	<<locked>>	73%	17042	87%	**76	100%
[Ramshot Silhouette]*	<<locked>>	72%	17245	88%	**29	83%
ReloadSwiss RS 12	<<locked>>	81%	17056	87%	**91	100%
[ReloadSwiss RS 20]*	<<locked>>	92%	17245	88%	**58	89%
Rottweil P 801	<<locked>>	73%	17085	87%	**48	100%
[SNPE Vectan A0]*	<<locked>>	87%	16984	87%	**79	85%
SNPE Vectan BA 9	<<locked>>	77%	16839	86%	**73	91%
SNPE Vectan BA10	<<locked>>	63%	16621	85%	**01	100%
SNPE Vectan BA9 1/2	<<locked>>	81%	16911	86%	**09	93%
[Somchem MP200]*	<<locked>>	81%	17564	90%	**32	85%
[Somchem MS200]*	<<locked>>	83%	17419	89%	**15	88%
Vihtavuori N320	<<locked>>	80%	16955	87%	**29	99%
Vihtavuori N32C Tin Star	<<locked>>	96%	12415	63%	**1	100%
Vihtavuori N330	<<locked>>	87%	17593	90%	**78	96%
[Vihtavuori N340]*	<<locked>>	87%	17274	88%	**25	87%
Winchester 231	<<locked>>	66%	16969	87%	**96	95%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	60%	11632	59%	**8	88%
ADI APS 350	<<locked>>	63%	15838	81%	**8	100%
ADI APS 450	<<locked>>	61%	14156	72%	**5	100%
ADI AS 30	<<locked>>	62%	11864	61%	**2	99%
ADI AS 50N	<<locked>>	62%	12372	63%	**1	95%
Accurate Solo 1000	<<locked>>	62%	12299	63%	**5	95%
[Accurate Solo 1250]*	<<locked>>	70%	10979	56%	**5	86%
[Alliant BULLSEYE]*	<<locked>>	61%	12212	62%	**4	81%
[Alliant Sport Pistol]*	<<locked>>	61%	13503	69%	**17	81%
[Alliant UNIQUE]*	<<locked>>	76%	12401	63%	**14	80%
Baschieri & Pellagri 100	<<locked>>	66%	11676	60%	**5	92%
Baschieri & Pellagri 102 Pistol	<<locked>>	84%	10051	51%	**2	93%
Baschieri & Pellagri 103 Pistol	<<locked>>	63%	10225	52%	**5	92%
Hodgdon Clays	<<locked>>	63%	15737	80%	**1	100%
[Hodgdon Universal]*	<<locked>>	62%	10051	51%	**2	86%
[Hodgdon CFE Pistol]*	<<locked>>	65%	10312	53%	**2	84%
Lovex S011	<<locked>>	60%	14098	72%	**4	92%
[Lovex S020]*	<<locked>>	66%	10544	54%	**2	80%
[Maxam CSB 1]*	<<locked>>	72%	10936	56%	**8	86%
Maxam CSB 2	<<locked>>	70%	8891	45%	**2	90%
Maxam CSB 3	<<locked>>	65%	10776	55%	**5	91%
Maxam CSB 4	<<locked>>	62%	11124	57%	**2	95%
Maxam CSB 5	<<locked>>	63%	12995	66%	**1	100%
[Ramshot Silhouette]*	<<locked>>	69%	15360	78%	**79	81%
ReloadSwiss RS 12	<<locked>>	61%	8775	45%	**5	93%
[ReloadSwiss RS 20]*	<<locked>>	78%	11864	61%	**1	80%
Rottweil P 801	<<locked>>	61%	11574	59%	**07	99%
[SNPE Vectan A0]*	<<locked>>	77%	13271	68%	**8	81%
[SNPE Vectan BA 9]*	<<locked>>	63%	11502	59%	**9	84%
SNPE Vectan BA10	<<locked>>	61%	15838	81%	**4	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	64%	10907	56%	**8	85%
[Somchem MP200]*	<<locked>>	73%	13938	71%	**30	80%
[Somchem MS200]*	<<locked>>	69%	11748	60%	**1	80%
Vihtavuori N320	<<locked>>	62%	9906	51%	**2	94%
Vihtavuori N32C Tin Star	<<locked>>	88%	10095	52%	**8	100%
[Vihtavuori N330]*	<<locked>>	66%	9602	49%	**9	85%
[Vihtavuori N340]*	<<locked>>	76%	12734	65%	**01	81%
Winchester 231	<<locked>>	62%	14779	75%	**43	93%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data