Load data for .380 ACP (9mm kurz) + .355 | 90gr | Hornady XTP

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 90gr \| Hornady XTP
Manufacturer SKU:	35500
Bullet Weight:	90gr \| 5.8g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.435" \| 11.0mm
Caliber:	.380 ACP (9mm kurz) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.147" \| 3.7mm
Shank Seated Depth:	0.147" \| 3.7mm
Case Capacity:	11.5 Grains of Water \| 0.75 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B2765_C608
Last updated:	2026-01-20

Load data for 78 loads in caliber .380 ACP (9mm kurz) with .355 | 90gr | Hornady XTP bullet and 39 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	72%	17608	90%	**45	95%
ADI APS 350	<<locked>>	65%	17231	88%	**1	100%
ADI APS 450	<<locked>>	68%	17114	87%	**04	100%
ADI AS 30	<<locked>>	74%	17158	88%	**60	100%
ADI AS 50N	<<locked>>	73%	17289	88%	**89	99%
[Accurate No. 2]*	<<locked>>	77%	17593	90%	**70	82%
Accurate Solo 1000	<<locked>>	73%	17216	88%	**60	99%
Accurate Solo 1250	<<locked>>	86%	17550	90%	**15	94%
[Alliant BULLSEYE]*	<<locked>>	73%	17274	88%	**22	87%
[Alliant Sport Pistol]*	<<locked>>	68%	17390	89%	**19	86%
[Alliant UNIQUE]*	<<locked>>	88%	17579	90%	**55	87%
Baschieri & Pellagri 100	<<locked>>	79%	17216	88%	**73	97%
Baschieri & Pellagri 102 Pistol	<<locked>>	96%	14547	74%	**63	98%
Baschieri & Pellagri 103 Pistol	<<locked>>	77%	16868	86%	**19	98%
Hodgdon Clays	<<locked>>	65%	17347	89%	**8	100%
Hodgdon Universal	<<locked>>	80%	17608	90%	**45	95%
Hodgdon CFE Pistol	<<locked>>	82%	17245	88%	**22	93%
Lovex S011	<<locked>>	66%	17622	90%	**76	95%
[Lovex S020]*	<<locked>>	80%	16955	87%	**19	89%
Maxam CSB 1	<<locked>>	88%	17289	88%	**06	94%
Maxam CSB 2 👍	<<locked>>	93%	17129	88%	**91	99%
Maxam CSB 3	<<locked>>	82%	17347	89%	**06	98%
Maxam CSB 4	<<locked>>	78%	17419	89%	**99	99%
Maxam CSB 5	<<locked>>	71%	16839	86%	**63	100%
[Ramshot Silhouette]*	<<locked>>	71%	17318	88%	**22	83%
ReloadSwiss RS 12	<<locked>>	80%	17202	88%	**84	100%
[ReloadSwiss RS 20]*	<<locked>>	91%	17085	87%	**48	88%
Rottweil P 801	<<locked>>	72%	17361	89%	**42	100%
[SNPE Vectan A0]*	<<locked>>	87%	17593	90%	**89	86%
SNPE Vectan BA 9	<<locked>>	77%	17419	89%	**83	91%
SNPE Vectan BA10	<<locked>>	63%	17100	87%	**04	100%
SNPE Vectan BA9 1/2	<<locked>>	79%	16984	87%	**99	93%
[Somchem MP200]*	<<locked>>	80%	17564	90%	**25	85%
[Somchem MS200]*	<<locked>>	82%	17100	87%	**99	87%
Vihtavuori N320	<<locked>>	78%	16723	85%	**12	99%
Vihtavuori N32C Tin Star	<<locked>>	96%	13169	67%	**04	100%
Vihtavuori N330	<<locked>>	85%	17564	90%	**68	96%
[Vihtavuori N340]*	<<locked>>	85%	17216	88%	**15	87%
Winchester 231	<<locked>>	66%	17579	90%	**06	95%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	60%	12459	64%	**4	89%
ADI APS 350	<<locked>>	63%	16302	83%	**1	100%
ADI APS 450	<<locked>>	61%	14591	75%	**8	100%
ADI AS 30	<<locked>>	62%	12604	64%	**2	99%
ADI AS 50N	<<locked>>	62%	13155	67%	**1	96%
[Accurate No. 2]*	<<locked>>	74%	16230	83%	**37	80%
Accurate Solo 1000	<<locked>>	62%	12865	66%	**5	96%
[Accurate Solo 1250]*	<<locked>>	68%	11008	56%	**5	86%
[Alliant BULLSEYE]*	<<locked>>	61%	12662	65%	**1	81%
[Alliant Sport Pistol]*	<<locked>>	61%	13982	71%	**27	82%
[Alliant UNIQUE]*	<<locked>>	75%	12749	65%	**10	81%
Baschieri & Pellagri 100	<<locked>>	64%	11647	59%	**5	92%
Baschieri & Pellagri 102 Pistol	<<locked>>	82%	10327	53%	**2	93%
Baschieri & Pellagri 103 Pistol	<<locked>>	61%	10457	53%	**2	92%
Hodgdon Clays	<<locked>>	63%	16375	84%	**5	100%
[Hodgdon Universal]*	<<locked>>	62%	10791	55%	**5	87%
[Hodgdon CFE Pistol]*	<<locked>>	65%	11095	57%	**5	85%
Lovex S011	<<locked>>	60%	14605	75%	**01	93%
[Lovex S020]*	<<locked>>	65%	10617	54%	**2	80%
[Maxam CSB 1]*	<<locked>>	70%	10979	56%	**2	86%
Maxam CSB 2	<<locked>>	68%	9036	46%	**8	90%
Maxam CSB 3	<<locked>>	65%	11327	58%	**5	92%
Maxam CSB 4	<<locked>>	60%	11153	57%	**2	95%
Maxam CSB 5	<<locked>>	63%	13489	69%	**4	100%
[Ramshot Silhouette]*	<<locked>>	68%	15403	79%	**73	81%
ReloadSwiss RS 12	<<locked>>	61%	9631	49%	**8	94%
[ReloadSwiss RS 20]*	<<locked>>	78%	12328	63%	**01	81%
Rottweil P 801	<<locked>>	61%	12459	64%	**17	99%
[SNPE Vectan A0]*	<<locked>>	75%	13329	68%	**1	80%
[SNPE Vectan BA 9]*	<<locked>>	63%	11908	61%	**5	84%
SNPE Vectan BA10	<<locked>>	61%	16317	83%	**4	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	64%	11473	59%	**8	86%
[Somchem MP200]*	<<locked>>	71%	14025	72%	**27	80%
[Somchem MS200]*	<<locked>>	67%	11792	60%	**2	80%
Vihtavuori N320	<<locked>>	62%	10472	53%	**2	94%
Vihtavuori N32C Tin Star	<<locked>>	86%	10443	53%	**2	100%
[Vihtavuori N330]*	<<locked>>	66%	10283	53%	**5	86%
[Vihtavuori N340]*	<<locked>>	73%	12285	63%	**4	80%
Winchester 231	<<locked>>	62%	15519	79%	**53	93%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data