Load data for .380 ACP (9mm kurz) + .355 | 115gr | Sierra FMJ RN SportsMaster

Recommended Powder(s): Rottweil P 801

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 115gr \| Sierra FMJ RN SportsMaster
Manufacturer SKU:	8115
Bullet Weight:	115gr \| 7.5g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.546" \| 13.9mm
Caliber:	.380 ACP (9mm kurz) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.258" \| 6.5mm
Shank Seated Depth:	0.258" \| 6.5mm
Case Capacity:	11.5 Grains of Water \| 0.75 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B5935_C608
Last updated:	2025-02-02

Load data for 68 loads in caliber .380 ACP (9mm kurz) with .355 | 115gr | Sierra FMJ RN SportsMaster bullet and 34 powders such as Rottweil P 801. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	79%	17579	90%	**2	95%
ADI APS 350	<<locked>>	69%	17143	88%	**5	100%
ADI APS 450	<<locked>>	70%	16070	82%	**4	100%
ADI AS 30	<<locked>>	77%	15577	80%	**1	100%
ADI AS 50N	<<locked>>	79%	17129	87%	**0	98%
Accurate Solo 1000	<<locked>>	78%	16636	85%	**7	98%
Accurate Solo 1250	<<locked>>	89%	15809	81%	**7	91%
[Alliant BULLSEYE]*	<<locked>>	75%	15998	82%	**6	85%
[Alliant UNIQUE]*	<<locked>>	92%	16244	83%	**9	85%
Baschieri & Pellagri 100	<<locked>>	83%	16375	84%	**3	96%
Hodgdon Clays	<<locked>>	69%	17013	87%	**1	100%
Hodgdon HP38	<<locked>>	63%	17419	89%	**0	95%
Hodgdon Universal	<<locked>>	88%	17579	90%	**2	95%
Lovex S011	<<locked>>	68%	16418	84%	**4	94%
[Lovex S020]*	<<locked>>	86%	16273	83%	**6	88%
Maxam CSB 1	<<locked>>	95%	16897	86%	**6	93%
Maxam CSB 2	<<locked>>	92%	13750	70%	**9	97%
Maxam CSB 3	<<locked>>	86%	16607	85%	**0	97%
Maxam CSB 4	<<locked>>	82%	16766	86%	**6	99%
Maxam CSB 5	<<locked>>	73%	15127	77%	**4	100%
ReloadSwiss RS 12	<<locked>>	89%	17332	88%	**5	100%
[ReloadSwiss RS 20]*	<<locked>>	94%	15461	79%	**6	85%
Rottweil P 801 👍	<<locked>>	75%	15519	79%	**6	100%
[SNPE Vectan A0]*	<<locked>>	93%	17434	89%	**0	85%
[SNPE Vectan BA 9]*	<<locked>>	81%	16737	86%	**0	89%
SNPE Vectan BA10	<<locked>>	65%	16041	82%	**4	100%
SNPE Vectan BA9 1/2	<<locked>>	87%	17419	89%	**9	93%
[Somchem MP200]*	<<locked>>	85%	17376	89%	**6	84%
[Somchem MS200]*	<<locked>>	86%	16317	83%	**3	86%
Vihtavuori N320	<<locked>>	85%	16230	83%	**6	99%
Vihtavuori N32C Tin Star	<<locked>>	93%	9921	51%	**9	100%
Vihtavuori N330	<<locked>>	91%	17347	89%	**6	95%
[Vihtavuori N340]*	<<locked>>	90%	16157	82%	**0	85%
Winchester 231	<<locked>>	70%	16665	85%	**6	94%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	60%	10428	53%	**8	86%
ADI APS 350	<<locked>>	62%	14286	73%	**9	100%
ADI APS 450	<<locked>>	63%	13590	69%	**2	100%
ADI AS 30	<<locked>>	64%	11400	58%	**9	98%
ADI AS 50N	<<locked>>	62%	11284	58%	**9	93%
Accurate Solo 1000	<<locked>>	60%	10791	55%	**2	93%
[Accurate Solo 1250]*	<<locked>>	66%	9007	46%	**3	81%
[Alliant BULLSEYE]*	<<locked>>	70%	14054	72%	**1	83%
[Alliant UNIQUE]*	<<locked>>	87%	14286	73%	**7	82%
Baschieri & Pellagri 100	<<locked>>	66%	10515	54%	**6	90%
Hodgdon Clays	<<locked>>	62%	14359	73%	**9	100%
[Hodgdon HP38]²	<<locked>>	59%	15302	78%	**7	94%
[Hodgdon Universal]*	<<locked>>	62%	9282	47%	**2	83%
Lovex S011	<<locked>>	63%	14199	73%	**1	91%
[Lovex S020]*	<<locked>>	71%	10907	56%	**1	80%
[Maxam CSB 1]*	<<locked>>	73%	10008	51%	**2	83%
[Maxam CSB 2]*	<<locked>>	71%	7963	41%	**2	87%
[Maxam CSB 3]*	<<locked>>	63%	9210	47%	**3	88%
[Maxam CSB 4]²	<<locked>>	59%	8963	46%	**3	91%
Maxam CSB 5	<<locked>>	61%	10907	56%	**5	100%
[ReloadSwiss RS 12]²	<<locked>>	59%	7527	38%	**6	90%
[ReloadSwiss RS 20]*	<<locked>>	89%	13764	70%	**7	82%
Rottweil P 801	<<locked>>	61%	10356	53%	**8	98%
[SNPE Vectan A0]*	<<locked>>	83%	13924	71%	**4	80%
[SNPE Vectan BA 9]*	<<locked>>	62%	10211	52%	**3	80%
[SNPE Vectan BA10]²	<<locked>>	59%	13735	70%	**2	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	61%	9021	46%	**3	81%
[Somchem MP200]*	<<locked>>	81%	15360	78%	**3	81%
[Somchem MS200]*	<<locked>>	76%	12836	66%	**1	81%
Vihtavuori N320	<<locked>>	62%	8963	46%	**6	91%
Vihtavuori N32C Tin Star	<<locked>>	86%	8557	44%	**9	99%
[Vihtavuori N330]*	<<locked>>	66%	9036	46%	**6	82%
[Vihtavuori N340]*	<<locked>>	85%	14272	73%	**0	82%
Winchester 231	<<locked>>	61%	12792	65%	**4	90%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data