Load data for .38 Spl. Wad Cut. + .357 | 148gr | LOS WC

.38 Spl. Wad Cut. cartridge drawing
LOS logo

Load Specifications

Bullet Manufacturer:LOS
Bullet Weight:148 gr
Bullet Diameter:0.357"
Bullet Length:<<locked>>
Case Length (l3):1.145"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:23.1 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:4"
Max. allowed Pressure:17,405 psi

Load data in caliber .38 Spl. Wad Cut. with .357 | 148gr | LOS WC bullet and 5 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Alliant Herco*²<<locked>>68%15,026 psi86%778 fps92.9%
Baschieri & Pellagri 102 Pistol²<<locked>>68%14,721 psi85%748 fps100%
Hodgdon TrailBossᴾ<<locked>>100%13,503 psi78%686 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%12,865 psi74%692 fps99.8%
Vihtavuori N32C Tin Star²<<locked>>76%15,185 psi87%712 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Alliant Herco*²<<locked>>60%12,705 psi73%719 fps90.1%
Baschieri & Pellagri 102 Pistol²<<locked>>60%12,169 psi70%692 fps99.9%
Hodgdon TrailBoss²1.8 gr60%7,542 psi43%522 fps98.6%
ReloadSwiss RS 14*²1.8 gr60%7,179 psi41%515 fps94.7%
Vihtavuori N32C Tin Star²<<locked>>60%11,052 psi64%627 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 5 powders for .38 Spl. Wad Cut. loaded with the .357 | 148gr | LOS WC. Alliant Herco delivers the highest muzzle velocity at 778 fps; across all powders the maximum-charge window runs from 686 fps to 778 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 2 of the 5 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (120 MPa), the top charges use 74–87 %, leaving at least 13 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .38 Spl. Wad Cut. with the .357 | 148gr | LOS WC they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Alliant Herco burn incompletely and react more sensitively to barrel length and temperature. Alliant Herco, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data