Load Specifications
Load data in caliber .38 Special with .358 | 150gr | LEE Mold 358-150-SWC bullet and 8 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon TrailBoss and ReloadSwiss RS 14.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 4"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Alliant Herco² | <<locked>> | 68% | 18,057 psi | 83% | 932 fps | 98.3% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 68% | 17,941 psi | 82% | 879 fps | 100% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 16,215 psi | 75% | 817 fps | 100% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 14,489 psi | 67% | 810 fps | 100% |
| Rottweil P 806*² | <<locked>> | 68% | 17,811 psi | 82% | 991 fps | 89.4% |
| SNPE Vectan BA7 1/2*² | <<locked>> | 64% | 18,347 psi | 84% | 938 fps | 92% |
| Vihtavuori N32C Tin Star² | <<locked>> | 76% | 18,188 psi | 84% | 837 fps | 100% |
| Vihtavuori N350*² | <<locked>> | 64% | 18,217 psi | 84% | 951 fps | 93.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 4"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Alliant Herco² | <<locked>> | 60% | 14,576 psi | 67% | 853 fps | 95.8% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 60% | 14,170 psi | 65% | 810 fps | 100% |
| Hodgdon TrailBoss² | 3.1 gr | 60% | 6,686 psi | 31% | 581 fps | 99.1% |
| ReloadSwiss RS 14*² | 3.2 gr | 60% | 6,164 psi | 28% | 571 fps | 94.8% |
| Rottweil P 806*² | <<locked>> | 64% | 15,258 psi | 70% | 928 fps | 86.1% |
| SNPE Vectan BA7 1/2*² | <<locked>> | 60% | 15,925 psi | 73% | 883 fps | 89.5% |
| Vihtavuori N32C Tin Star² | <<locked>> | 60% | 12,009 psi | 55% | 725 fps | 100% |
| Vihtavuori N350*² | <<locked>> | 60% | 16,085 psi | 74% | 902 fps | 91.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 2 powders for .38 Special loaded with the .358 | 150gr | LEE Mold 358-150-SWC. Hodgdon TrailBoss delivers the highest muzzle velocity at 817 fps; across all powders the maximum-charge window runs from 810 fps to 817 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 2 of the 2 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (150 MPa), the top charges use 67–75 %, leaving at least 25 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon TrailBoss, ReloadSwiss RS 14 rank at the top here: for .38 Special with the .358 | 150gr | LEE Mold 358-150-SWC they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss, ReloadSwiss RS 14 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.