Load data for .38 Special + .358 | 148gr | LEE Mold 358-148-WC

.38 Special cartridge drawing
LEE logo

Load Specifications

Bullet Manufacturer:LEE
Bullet Weight:148 gr
Bullet Diameter:0.358"
Bullet Length:<<locked>>
Case Length (l3):1.145"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:23.1 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:4"
Max. allowed Pressure:21,756 psi

Load data in caliber .38 Special with .358 | 148gr | LEE Mold 358-148-WC bullet and 8 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon TrailBoss and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Alliant Herco²<<locked>>68%19,014 psi87%965 fps98.8%
Baschieri & Pellagri 102 Pistol²<<locked>>68%19,029 psi87%912 fps100%
Hodgdon TrailBossᴾ<<locked>>100%16,462 psi76%833 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%14,750 psi68%827 fps100%
Rottweil P 806*²<<locked>>68%19,334 psi89%1030 fps90.9%
SNPE Vectan BA7 1/2*²<<locked>>64%19,058 psi88%965 fps92.7%
Vihtavuori N32C Tin Star²<<locked>>76%19,014 psi87%860 fps100%
Vihtavuori N350*²<<locked>>64%19,072 psi88%978 fps94.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Alliant Herco²<<locked>>60%15,127 psi70%876 fps96.3%
Baschieri & Pellagri 102 Pistol²<<locked>>60%14,837 psi68%833 fps100%
Hodgdon TrailBoss²3.3 gr60%6,904 psi32%597 fps99.3%
ReloadSwiss RS 14²3.4 gr60%6,353 psi29%584 fps95.2%
Rottweil P 806*²<<locked>>64%16,375 psi75%961 fps87.5%
SNPE Vectan BA7 1/2*²<<locked>>60%16,694 psi77%912 fps90.4%
Vihtavuori N32C Tin Star²<<locked>>60%12,517 psi58%741 fps100%
Vihtavuori N350*²<<locked>>60%16,998 psi78%935 fps92.2%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 8 powders for .38 Special loaded with the .358 | 148gr | LEE Mold 358-148-WC. Rottweil P 806 delivers the highest muzzle velocity at 1,030 fps; across all powders the maximum-charge window runs from 827 fps to 1,030 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 2 of the 8 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (150 MPa), the top charges use 68–89 %, leaving at least 11 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon TrailBoss, ReloadSwiss RS 14 rank at the top here: for .38 Special with the .358 | 148gr | LEE Mold 358-148-WC they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Rottweil P 806, SNPE Vectan BA7 1/2, Vihtavuori N350 burn incompletely and react more sensitively to barrel length and temperature. Alliant Herco, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data