Load data for .38 Special + .357 | 180gr | H&N KS HS

.38 Special cartridge drawing
H&N logo

Load Specifications

Bullet Manufacturer:H&N
Bullet Weight:180 gr
Bullet Diameter:0.357"
Bullet Length:<<locked>>
Case Length (l3):1.145"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:23.1 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:4"
Max. allowed Pressure:21,756 psi

Load data in caliber .38 Special with .357 | 180gr | H&N KS HS bullet and 8 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
ADI AP 100*²<<locked>>68%18,289 psi84%840 fps88.5%
Alliant Herco²<<locked>>64%17,970 psi83%817 fps99.4%
Baschieri & Pellagri 102 Pistol²<<locked>>68%19,087 psi88%784 fps100%
Hodgdon TrailBossᴾ<<locked>>100%17,202 psi79%722 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%15,925 psi73%728 fps100%
Rottweil P 806*²<<locked>>64%17,666 psi81%883 fps92.6%
Vihtavuori N32C Tin Star²<<locked>>72%17,927 psi82%719 fps100%
Vihtavuori N350²<<locked>>64%19,624 psi90%866 fps96.5%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
ADI AP 100*²<<locked>>64%16,085 psi74%797 fps86%
Alliant Herco²<<locked>>60%16,230 psi75%784 fps98.7%
Baschieri & Pellagri 102 Pistol²<<locked>>60%15,287 psi70%725 fps100%
Hodgdon TrailBoss²2.6 gr60%8,050 psi37%538 fps100%
ReloadSwiss RS 14²2.7 gr60%7,760 psi36%541 fps99.3%
Rottweil P 806*²<<locked>>60%14,924 psi69%823 fps89.5%
Vihtavuori N32C Tin Star²<<locked>>60%13,373 psi61%646 fps100%
Vihtavuori N350²<<locked>>60%17,695 psi81%830 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 8 powders for .38 Special loaded with the .357 | 180gr | H&N KS HS. Rottweil P 806 delivers the highest muzzle velocity at 883 fps; across all powders the maximum-charge window runs from 719 fps to 883 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 2 of the 8 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (150 MPa), the top charges use 73–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .38 Special with the .357 | 180gr | H&N KS HS they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, ADI AP 100, Rottweil P 806 burn incompletely and react more sensitively to barrel length and temperature. ADI AP 100, Alliant Herco, Baschieri & Pellagri 102 Pistol stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data