Load data for .38 Special + .357 | 150gr | Nosler SP

.38 Special cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:150 gr
Bullet Diameter:0.357"
Bullet Length:<<locked>>
Case Length (l3):1.145"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:23.1 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:4"
Max. allowed Pressure:21,756 psi

Load data in caliber .38 Special with .357 | 150gr | Nosler SP bullet and 6 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon TrailBoss and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Alliant Herco²<<locked>>64%17,956 psi83%922 fps98.4%
Baschieri & Pellagri 102 Pistol²<<locked>>64%17,535 psi81%866 fps100%
Hodgdon TrailBossᴾ<<locked>>100%17,622 psi81%833 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%16,259 psi75%833 fps100%
Rottweil P 806*²<<locked>>64%18,043 psi83%988 fps90.1%
Vihtavuori N32C Tin Star²<<locked>>68%19,595 psi90%850 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Alliant Herco²<<locked>>60%16,520 psi76%889 fps97.6%
Baschieri & Pellagri 102 Pistol²<<locked>>60%15,998 psi74%837 fps100%
Hodgdon TrailBoss²3.2 gr60%8,209 psi38%617 fps100%
ReloadSwiss RS 14²3.3 gr60%7,847 psi36%617 fps98.4%
Rottweil P 806*²<<locked>>60%15,693 psi72%932 fps87.2%
Vihtavuori N32C Tin Star²<<locked>>60%15,621 psi72%781 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 6 powders for .38 Special loaded with the .357 | 150gr | Nosler SP. Rottweil P 806 delivers the highest muzzle velocity at 988 fps; across all powders the maximum-charge window runs from 833 fps to 988 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 2 of the 6 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (150 MPa), the top charges use 75–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon TrailBoss, ReloadSwiss RS 14 rank at the top here: for .38 Special with the .357 | 150gr | Nosler SP they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Rottweil P 806 burn incompletely and react more sensitively to barrel length and temperature. Alliant Herco, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data