Load data for .38 Special + .356 | 165gr | X-TREME RN

.38 Special cartridge drawing
X-TREME logo

Load Specifications

Bullet Manufacturer:X-TREME
Bullet Weight:165 gr
Bullet Diameter:0.356"
Bullet Length:<<locked>>
Case Length (l3):1.145"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:23.1 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:4"
Max. allowed Pressure:21,756 psi

Load data in caliber .38 Special with .356 | 165gr | X-TREME RN bullet and 6 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Alliant Herco²<<locked>>64%18,623 psi86%853 fps99%
Baschieri & Pellagri 102 Pistol²<<locked>>64%18,318 psi84%801 fps100%
Hodgdon TrailBossᴾ<<locked>>100%18,463 psi85%764 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%17,434 psi80%771 fps100%
Rottweil P 806*²<<locked>>64%18,289 psi84%922 fps91.6%
Vihtavuori N32C Tin Star²<<locked>>72%19,261 psi89%761 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Alliant Herco²<<locked>>60%16,955 psi78%820 fps98.3%
Baschieri & Pellagri 102 Pistol²<<locked>>60%16,476 psi76%768 fps100%
Hodgdon TrailBoss²2.6 gr60%9,427 psi43%577 fps100%
ReloadSwiss RS 14²2.6 gr60%8,876 psi41%574 fps99.7%
Rottweil P 806*²<<locked>>60%16,172 psi74%876 fps89.4%
Vihtavuori N32C Tin Star²<<locked>>60%14,779 psi68%689 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 2 powders for .38 Special loaded with the .356 | 165gr | X-TREME RN. ReloadSwiss RS 14 delivers the highest muzzle velocity at 771 fps; across all powders the maximum-charge window runs from 764 fps to 771 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 2 of the 2 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (150 MPa), the top charges use 80–85 %, leaving at least 15 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .38 Special with the .356 | 165gr | X-TREME RN they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss, ReloadSwiss RS 14 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data