Load data for .38 Special + .356 | 124gr | LEE Mold 356-124-TC

.38 Special cartridge drawing
LEE logo

Load Specifications

Bullet Manufacturer:LEE
Bullet Weight:124 gr
Bullet Diameter:0.356"
Bullet Length:<<locked>>
Case Length (l3):1.145"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:23.1 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:4"
Max. allowed Pressure:21,756 psi

Load data in caliber .38 Special with .356 | 124gr | LEE Mold 356-124-TC bullet and 9 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon TrailBoss and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Alliant Herco²<<locked>>72%18,884 psi87%1053 fps96.8%
Baschieri & Pellagri 102 Pistol²<<locked>>72%18,594 psi85%1001 fps100%
Hodgdon TrailBossᴾ<<locked>>100%14,750 psi68%889 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%13,068 psi60%873 fps100%
ReloadSwiss RS 20²<<locked>>64%19,595 psi90%1086 fps98.8%
SNPE Vectan BA7 1/2*²<<locked>>68%18,869 psi87%1050 fps89.3%
Vihtavuori 3N37*²<<locked>>64%19,595 psi90%1083 fps90.9%
Vihtavuori N32C Tin Star<<locked>>80%18,217 psi84%942 fps100%
Vihtavuori N350*²<<locked>>68%18,739 psi86%1066 fps90.6%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Alliant Herco*²<<locked>>60%13,053 psi60%902 fps91.1%
Baschieri & Pellagri 102 Pistol²<<locked>>60%12,734 psi59%869 fps100%
Hodgdon TrailBoss²3.3 gr60%6,106 psi28%627 fps96.1%
ReloadSwiss RS 14*²3.4 gr60%5,584 psi26%610 fps89.8%
ReloadSwiss RS 20²<<locked>>60%17,303 psi80%1033 fps97.5%
SNPE Vectan BA7 1/2*²<<locked>>64%16,578 psi76%994 fps86.7%
Vihtavuori 3N37*²<<locked>>60%16,621 psi76%1014 fps87.8%
Vihtavuori N32C Tin Star²<<locked>>60%11,081 psi51%791 fps100%
Vihtavuori N350*²<<locked>>60%14,446 psi66%955 fps85.4%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 9 powders for .38 Special loaded with the .356 | 124gr | LEE Mold 356-124-TC. ReloadSwiss RS 20 delivers the highest muzzle velocity at 1,086 fps; across all powders the maximum-charge window runs from 873 fps to 1,086 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 3 of the 9 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (150 MPa), the top charges use 60–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon TrailBoss, ReloadSwiss RS 14 rank at the top here: for .38 Special with the .356 | 124gr | LEE Mold 356-124-TC they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, SNPE Vectan BA7 1/2, Vihtavuori 3N37, Vihtavuori N350 burn incompletely and react more sensitively to barrel length and temperature. Alliant Herco, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data