Load Specifications
Load data in caliber .38 Short Colt with .356 | 125gr | SNS Coated Bullets RN bullet and 4 powders. The key underlying parameters are shown in the table above.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 3"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Baschieri & Pellagri 102 Pistol*² | <<locked>> | 72% | 11,371 psi | 87% | 650 fps | 93.6% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 9,790 psi | 75% | 584 fps | 95.2% |
| ReloadSwiss RS 14*ᴾ | <<locked>> | 100% | 9,471 psi | 73% | 581 fps | 89.9% |
| Vihtavuori N32C Tin Star² | <<locked>> | 72% | 11,414 psi | 87% | 633 fps | 99.8% |
Start Load - Barrel Length: 3"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Baschieri & Pellagri 102 Pistol*² | <<locked>> | 60% | 8,528 psi | 65% | 564 fps | 88.5% |
| Hodgdon TrailBoss*² | <<locked>> | 60% | 5,990 psi | 46% | 440 fps | 87.4% |
| ReloadSwiss RS 14* | <<locked>> | 84% | 7,600 psi | 58% | 515 fps | 85.8% |
| Vihtavuori N32C Tin Star² | <<locked>> | 60% | 8,775 psi | 67% | 564 fps | 98% |
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 1 powders for .38 Short Colt loaded with the .356 | 125gr | SNS Coated Bullets RN. Hodgdon TrailBoss delivers the highest muzzle velocity at 584 fps; across all powders the maximum-charge window runs from 584 fps to 584 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 1 of the 1 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (90 MPa), the top charges use 75–75 %, leaving at least 25 % headroom. Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.