
Load Specifications
Load data in caliber .38 Short Colt with .356 | 124gr | LEE Mold 356-124-TC bullet and 7 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 3"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Baschieri & Pellagri 102 Pistol* | <<locked>> | 84% | 10,443 psi | 80% | 659 fps | 91.7% |
| Baschieri & Pellagri 103 Pistol*² | <<locked>> | 64% | 11,066 psi | 85% | 673 fps | 91.2% |
| Hodgdon TrailBoss*ᴾ | <<locked>> | 100% | 6,353 psi | 49% | 525 fps | 87.3% |
| Maxam CSB 2*² | <<locked>> | 76% | 11,690 psi | 90% | 722 fps | 92.4% |
| Maxam CSB 3*² | <<locked>> | 64% | 11,327 psi | 87% | 663 fps | 90.4% |
| ReloadSwiss RS 12*² | <<locked>> | 64% | 10,327 psi | 79% | 686 fps | 93.2% |
| Vihtavuori N32C Tin Star | <<locked>> | 96% | 10,965 psi | 84% | 666 fps | 99.6% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 3"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Baschieri & Pellagri 102 Pistol*² | <<locked>> | 72% | 7,716 psi | 59% | 581 fps | 85.6% |
| Baschieri & Pellagri 103 Pistol*² | <<locked>> | 60% | 9,689 psi | 74% | 636 fps | 88.8% |
| Hodgdon TrailBoss* | <<locked>> | 96% | 5,787 psi | 44% | 505 fps | 85.3% |
| Maxam CSB 2*² | <<locked>> | 68% | 9,123 psi | 70% | 653 fps | 87.4% |
| Maxam CSB 3*² | <<locked>> | 60% | 9,500 psi | 73% | 614 fps | 87.1% |
| ReloadSwiss RS 12*² | <<locked>> | 60% | 9,427 psi | 72% | 663 fps | 91.6% |
| Vihtavuori N32C Tin Star*² | 1.8 gr | 64% | 4,859 psi | 37% | 476 fps | 87.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 7 powders for .38 Short Colt loaded with the .356 | 124gr | LEE Mold 356-124-TC. Maxam CSB 2 delivers the highest muzzle velocity at 722 fps; across all powders the maximum-charge window runs from 525 fps to 722 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 3 of the 7 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (90 MPa), the top charges use 49–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star rank at the top here: for .38 Short Colt with the .356 | 124gr | LEE Mold 356-124-TC they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Baschieri & Pellagri 102 Pistol, Baschieri & Pellagri 103 Pistol, Hodgdon TrailBoss burn incompletely and react more sensitively to barrel length and temperature. Baschieri & Pellagri 102 Pistol, Baschieri & Pellagri 103 Pistol, Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.