Load data for .38 Short Colt + .356 | 102gr | LEE Mold 356-102-1R

.38 Short Colt cartridge drawing
LEE logo

Load Specifications

Bullet Manufacturer:LEE
Bullet Weight:102 gr
Bullet Diameter:0.356"
Bullet Length:<<locked>>
Case Length (l3):0.755"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:11 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:3"
Max. allowed Pressure:13,053 psi

Load data in caliber .38 Short Colt with .356 | 102gr | LEE Mold 356-102-1R bullet and 8 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Alliant Green Dot*²<<locked>>64%11,676 psi89%755 fps90.3%
Alliant RED DOT*²<<locked>>64%11,095 psi85%738 fps94.8%
Baschieri & Pellagri 102 Pistol*<<locked>>88%11,269 psi86%768 fps90%
Maxam CSB 3*²<<locked>>68%11,574 psi89%758 fps87.8%
Maxam CSB 4*²<<locked>>64%11,545 psi88%751 fps91.4%
ReloadSwiss RS 12*²<<locked>>68%11,618 psi89%814 fps92.3%
Vihtavuori N320*²<<locked>>64%11,081 psi85%761 fps90.8%
Vihtavuori N32C Tin Starᴾ<<locked>>100%11,414 psi87%768 fps98.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Alliant Green Dot*²<<locked>>60%10,037 psi77%705 fps87.3%
Alliant RED DOT*²<<locked>>60%10,182 psi78%712 fps93.5%
Baschieri & Pellagri 102 Pistol*<<locked>>80%9,282 psi71%709 fps86%
Maxam CSB 3*²<<locked>>64%10,747 psi82%732 fps86.3%
Maxam CSB 4*²<<locked>>60%10,660 psi82%728 fps89.9%
ReloadSwiss RS 12*²<<locked>>60%8,528 psi65%719 fps86%
Vihtavuori N320*²<<locked>>60%9,427 psi72%715 fps87.6%
Vihtavuori N32C Tin Star*²2.2 gr68%5,236 psi40%558 fps85.1%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 8 powders for .38 Short Colt loaded with the .356 | 102gr | LEE Mold 356-102-1R. ReloadSwiss RS 12 delivers the highest muzzle velocity at 814 fps; across all powders the maximum-charge window runs from 738 fps to 814 fps. Vihtavuori N32C Tin Star gives the best case fill at 100 %, and 2 of the 8 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (90 MPa), the top charges use 85–89 %, leaving at least 11 % headroom. Vihtavuori N32C Tin Star reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star rank at the top here: for .38 Short Colt with the .356 | 102gr | LEE Mold 356-102-1R they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Alliant Green Dot, Alliant RED DOT, Baschieri & Pellagri 102 Pistol burn incompletely and react more sensitively to barrel length and temperature. Alliant Green Dot, Alliant RED DOT, Baschieri & Pellagri 102 Pistol stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data