Load data for .38 Short Colt + .355 | 124gr | Speer HPSB GD

.38 Short Colt cartridge drawing
Speer logo

Load Specifications

Bullet Manufacturer:Speer
Bullet Weight:124 gr
Bullet Diameter:0.355"
Bullet Length:<<locked>>
Case Length (l3):0.755"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:11 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:3"
Max. allowed Pressure:13,053 psi

Load data in caliber .38 Short Colt with .355 | 124gr | Speer HPSB GD bullet and 5 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Alliant BE-86*²<<locked>>64%11,502 psi88%676 fps89.1%
Baschieri & Pellagri 102 Pistol*<<locked>>80%11,792 psi90%689 fps94.3%
Hodgdon TrailBoss*ᴾ<<locked>>100%8,064 psi62%568 fps92.2%
Maxam CSB 2*²<<locked>>68%10,907 psi84%692 fps91.5%
Vihtavuori N32C Tin Star<<locked>>84%10,327 psi79%640 fps99.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Alliant BE-86*²<<locked>>60%10,095 psi77%636 fps86.6%
Baschieri & Pellagri 102 Pistol*²<<locked>>64%7,977 psi61%581 fps87%
Hodgdon TrailBoss*²<<locked>>76%5,540 psi42%472 fps85.1%
Maxam CSB 2*²<<locked>>60%8,775 psi67%630 fps87%
Vihtavuori N32C Tin Star*²1.8 gr60%6,048 psi46%509 fps92.7%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 5 powders for .38 Short Colt loaded with the .355 | 124gr | Speer HPSB GD. Maxam CSB 2 delivers the highest muzzle velocity at 692 fps; across all powders the maximum-charge window runs from 568 fps to 692 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 3 of the 5 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (90 MPa), the top charges use 62–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star rank at the top here: for .38 Short Colt with the .355 | 124gr | Speer HPSB GD they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Alliant BE-86, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss burn incompletely and react more sensitively to barrel length and temperature. Alliant BE-86, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data