Load data for .38 Short Colt + .355 | 124gr | CamPro HP

.38 Short Colt cartridge drawing
CamPro logo

Load Specifications

Bullet Manufacturer:CamPro
Bullet Weight:124 gr
Bullet Diameter:0.355"
Bullet Length:<<locked>>
Case Length (l3):0.755"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:11 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:3"
Max. allowed Pressure:13,053 psi

Load data in caliber .38 Short Colt with .355 | 124gr | CamPro HP bullet and 5 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Baschieri & Pellagri 102 Pistol*²<<locked>>76%11,124 psi85%676 fps93.7%
Hodgdon TrailBoss*ᴾ<<locked>>100%8,340 psi64%577 fps93.2%
Maxam CSB 2*²<<locked>>64%10,428 psi80%682 fps91%
ReloadSwiss RS 14*ᴾ<<locked>>100%7,673 psi59%568 fps86.3%
Vihtavuori N32C Tin Star<<locked>>84%11,385 psi87%669 fps99.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Baschieri & Pellagri 102 Pistol*²<<locked>>60%7,629 psi58%571 fps86.5%
Hodgdon TrailBoss*²<<locked>>76%5,816 psi45%489 fps86.5%
Maxam CSB 2*²<<locked>>60%9,079 psi70%643 fps88.2%
ReloadSwiss RS 14*<<locked>>96%7,223 psi55%551 fps85.1%
Vihtavuori N32C Tin Star*²1.9 gr60%6,324 psi48%522 fps93.8%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 5 powders for .38 Short Colt loaded with the .355 | 124gr | CamPro HP. Maxam CSB 2 delivers the highest muzzle velocity at 682 fps; across all powders the maximum-charge window runs from 568 fps to 682 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 3 of the 5 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (90 MPa), the top charges use 59–87 %, leaving at least 13 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star rank at the top here: for .38 Short Colt with the .355 | 124gr | CamPro HP they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss, Maxam CSB 2 burn incompletely and react more sensitively to barrel length and temperature. Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss, Maxam CSB 2 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data