Load data for .38 Short Colt + .355 | 116.6gr | Peregrine VRG6 Solid

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Load data for 30 loads in caliber .38 Short Colt with .355 | 116.6gr | Peregrine VRG6 Solid bullet and 15 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	FR	%	z
ADI AP 70N	65%	90%	92%
Accurate Solo 1250	73%	83%	89%
Baschieri & Pellagri 100	68%	86%	95%
Hodgdon Universal	72%	90%	92%
Lovex S020	70%	83%	85%
Maxam CSB 1	78%	89%	90%
Maxam CSB 2	80%	79%	96%
Maxam CSB 3	71%	89%	95%
ReloadSwiss RS 12	73%	88%	99%
SNPE Vectan BA 9	67%	90%	87%
SNPE Vectan BA9 1/2	67%	81%	88%
Somchem MS200	71%	85%	83%
Vihtavuori N320	69%	87%	98%
Vihtavuori N32C Tin Star	93%	76%	100%
Vihtavuori N330	75%	90%	92%

Max Load - Barrel Length: 5.50''

Powder	FR	%	z
ADI AP 70N	61%	79%	90%
Accurate Solo 1250	64%	63%	83%
Baschieri & Pellagri 100	59%	63%	90%
Hodgdon Universal	59%	59%	84%
Lovex S020	66%	72%	82%
Maxam CSB 1	64%	59%	83%
Maxam CSB 2	63%	44%	84%
Maxam CSB 3	61%	66%	90%
ReloadSwiss RS 12	61%	56%	94%
SNPE Vectan BA 9	63%	80%	85%
SNPE Vectan BA9 1/2	63%	70%	86%
Somchem MS200	67%	75%	80%
Vihtavuori N320	60%	63%	94%
Vihtavuori N32C Tin Star	76%	48%	98%
Vihtavuori N330	63%	59%	84%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data