Load data for .38 Short Colt + .355 | 115gr | Prvi Partizan FMJ

.38 Short Colt cartridge drawing
Prvi Partizan logo

Load Specifications

Bullet Manufacturer:Prvi Partizan
Bullet Weight:115 gr
Bullet Diameter:0.355"
Bullet Length:<<locked>>
Case Length (l3):0.755"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:11 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:3"
Max. allowed Pressure:13,053 psi

Load data in caliber .38 Short Colt with .355 | 115gr | Prvi Partizan FMJ bullet and 5 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Alliant BE-86*²<<locked>>64%11,632 psi89%712 fps88.2%
Baschieri & Pellagri 102 Pistol*<<locked>>80%11,792 psi90%722 fps93.3%
Hodgdon TrailBoss*ᴾ<<locked>>100%7,847 psi60%587 fps90.7%
Maxam CSB 2*²<<locked>>68%11,095 psi85%732 fps90.6%
Vihtavuori N32C Tin Star<<locked>>88%11,356 psi87%699 fps99.5%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 3"

PowderChargeFRMaxP%V(0)z
Alliant BE-86*²<<locked>>60%10,269 psi79%676 fps85.8%
Baschieri & Pellagri 102 Pistol*²<<locked>>68%8,688 psi67%633 fps87.6%
Hodgdon TrailBoss*<<locked>>80%5,903 psi45%515 fps85.2%
Maxam CSB 2*²<<locked>>64%9,674 psi74%689 fps87.8%
Vihtavuori N32C Tin Star*²1.9 gr60%5,961 psi46%528 fps91.3%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 5 powders for .38 Short Colt loaded with the .355 | 115gr | Prvi Partizan FMJ. Maxam CSB 2 delivers the highest muzzle velocity at 732 fps; across all powders the maximum-charge window runs from 587 fps to 732 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 3 of the 5 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (90 MPa), the top charges use 60–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star rank at the top here: for .38 Short Colt with the .355 | 115gr | Prvi Partizan FMJ they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Alliant BE-86, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss burn incompletely and react more sensitively to barrel length and temperature. Alliant BE-86, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data