Load data for .38 Long Colt + .355 | 65gr | Lehigh Defense Xtreme Defense

.38 Long Colt cartridge drawing
Lehigh Defense logo

Load Specifications

Bullet Manufacturer:Lehigh Defense
Bullet Weight:65 gr
Bullet Diameter:0.355"
Bullet Length:<<locked>>
Case Length (l3):1.035"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:17.3 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:4"
Max. allowed Pressure:13,053 psi

Load data in caliber .38 Long Colt with .355 | 65gr | Lehigh Defense Xtreme Defense bullet and 4 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Baschieri & Pellagri 102 Pistol*<<locked>>84%10,936 psi84%1119 fps88.2%
ReloadSwiss RS 12*²<<locked>>64%10,457 psi80%1145 fps88.5%
Vihtavuori N320*²<<locked>>64%11,284 psi86%1138 fps89.8%
Vihtavuori N32C Tin Starᴾ<<locked>>100%11,748 psi90%1145 fps98.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Baschieri & Pellagri 102 Pistol*<<locked>>80%9,674 psi74%1063 fps85.5%
ReloadSwiss RS 12*²<<locked>>60%8,992 psi69%1079 fps85.2%
Vihtavuori N320*²<<locked>>60%9,674 psi74%1070 fps86.6%
Vihtavuori N32C Tin Star*²3.7 gr72%5,903 psi45%869 fps86.2%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 4 powders for .38 Long Colt loaded with the .355 | 65gr | Lehigh Defense Xtreme Defense. ReloadSwiss RS 12 delivers the highest muzzle velocity at 1,145 fps; across all powders the maximum-charge window runs from 1,119 fps to 1,145 fps. Vihtavuori N32C Tin Star gives the best case fill at 100 %, and 2 of the 4 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (90 MPa), the top charges use 80–90 %, leaving at least 10 % headroom. Vihtavuori N32C Tin Star reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star rank at the top here: for .38 Long Colt with the .355 | 65gr | Lehigh Defense Xtreme Defense they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Baschieri & Pellagri 102 Pistol, ReloadSwiss RS 12, Vihtavuori N320 burn incompletely and react more sensitively to barrel length and temperature. Baschieri & Pellagri 102 Pistol, ReloadSwiss RS 12, Vihtavuori N320 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data