Load data for .38 Long Colt + .355 | 135gr | X-TREME RP HP

.38 Long Colt cartridge drawing
X-TREME logo

Load Specifications

Bullet Manufacturer:X-TREME
Bullet Weight:135 gr
Bullet Diameter:0.355"
Bullet Length:<<locked>>
Case Length (l3):1.035"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:17.3 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:4"
Max. allowed Pressure:13,053 psi

Load data in caliber .38 Long Colt with .355 | 135gr | X-TREME RP HP bullet and 3 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Hodgdon TrailBoss<<locked>>88%11,342 psi87%673 fps100%
ReloadSwiss RS 14<<locked>>92%10,892 psi83%676 fps98.2%
Vihtavuori N32C Tin Star²<<locked>>64%11,400 psi87%673 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 4"

PowderChargeFRMaxP%V(0)z
Hodgdon TrailBoss²1.8 gr60%7,150 psi55%535 fps97.2%
ReloadSwiss RS 14*²1.9 gr60%7,150 psi55%541 fps93.1%
Vihtavuori N32C Tin Star²<<locked>>60%10,791 psi83%656 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

<<locked>> you need an access license to unlock this data.

This overview compares 3 powders for .38 Long Colt loaded with the .355 | 135gr | X-TREME RP HP. ReloadSwiss RS 14 delivers the highest muzzle velocity at 676 fps; across all powders the maximum-charge window runs from 673 fps to 676 fps. ReloadSwiss RS 14 gives the best case fill at 92 %, and 2 of the 3 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (90 MPa), the top charges use 83–87 %, leaving at least 13 % headroom. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .38 Long Colt with the .355 | 135gr | X-TREME RP HP they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss, ReloadSwiss RS 14, Vihtavuori N32C Tin Star stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data