Load Specifications
Load data in caliber .38 Long Colt with .355 | 124gr | Frontier RN PCB bullet and 3 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon TrailBoss and ReloadSwiss RS 14.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 4"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Hodgdon TrailBoss | <<locked>> | 92% | 11,443 psi | 88% | 719 fps | 99.9% |
| ReloadSwiss RS 14 | <<locked>> | 96% | 11,443 psi | 88% | 732 fps | 98.1% |
| Vihtavuori N32C Tin Star² | <<locked>> | 64% | 11,487 psi | 88% | 715 fps | 100% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 4"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Hodgdon TrailBoss² | 1.9 gr | 60% | 7,078 psi | 54% | 564 fps | 96.3% |
| ReloadSwiss RS 14*² | 1.9 gr | 60% | 6,759 psi | 52% | 551 fps | 91.3% |
| Vihtavuori N32C Tin Star² | <<locked>> | 60% | 10,428 psi | 80% | 686 fps | 100% |
Recommended = one of the top powders for this cartridge and bullet combination.
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
This overview compares 3 powders for .38 Long Colt loaded with the .355 | 124gr | Frontier RN PCB. ReloadSwiss RS 14 delivers the highest muzzle velocity at 732 fps; across all powders the maximum-charge window runs from 715 fps to 732 fps. ReloadSwiss RS 14 gives the best case fill at 96 %, and 2 of the 3 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (90 MPa), the top charges use 88–88 %, leaving at least 12 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 rank at the top here: for .38 Long Colt with the .355 | 124gr | Frontier RN PCB they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss, ReloadSwiss RS 14, Vihtavuori N32C Tin Star stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.